Leaderboard

This base flash allows you to leave the line at a predefined Boost level. How it works, if mph is = 0 and you have "boost defueling" set the truck will limit fueling up to the boost defuel setting until mph > 0 then it will allow for full fueling. Example, if you want to leave the line at 10 psi of boost, you would set your boost defuel to 9 or 10 psi ( allow for some overhead). ensure your boost defuel is enabled. 1. Brake stand the truck and the quadzilla will only allow enough fuel for 10 psi of boost 2. lift off the brakes 3. as soon as mph > 0 then the quadzilla will allow full fuel. 4...... 5. profit

This file is a Tune builder tool that opens in Excel and allows you to alter V2 tunes using your computer. The article that covers the useage is here

ADR9802_4kV2 V2 tuning for the 4k Adrenaline. V2 tuning will allow the user to customize how much fuel is being sent via the CAN bus per PSI of boost. Adjust timing for every 500RPM starting at 1500 RPM and moving up to 4000 RPM. Adjust timing for high throttle low boost. Adjust timing for low throttle low engine load. Lots and lots of adjustments.