thracing

yes i do but they are too big to load

36 foot tri-axle #42,000 pds loaded

thats how i got mine run on my truck you will get lots of 1/2 hose left over from your install just buy the fitting,s ,filter /pump and use your left over 1/2 hose your airdog 150 comes with 1/2 line kit no need to buy one just the extra two fittings

a surging pump is a indication of air in the system crack your injectors one at a time this should clear it up for you

suncoast hands down ,they are very good to talk too ,they will build a trany for your needs and not try too force you to buy something you do not need ,most cases for towing its just a upgraded valve body and torque converter

frout drive shafts have a little metal tag spot welded on them for balance these are prone to break off over time and will create a viberation take if off and go to a shop that do,s drive shafts and they can rebalance it for you

moparman if you lived closer you would have no time too play with your truck we would have your 73 done and you would be out rippin up the naborhood all the time lol

a couple of pix of some of the truck on the rollers more to come

a while back someone had started a thread on conversions here is my last one i did

5 days left before my back shop and parking lot turns into a truck stop lol hopeing to see some good numbers on the rollers hopeing to see any of the canadain boys on here come by for a visit would be nice to meet you guys bob

got a new mural done on the truck tailgate

hi uber crossover to wix 24.47 out the door tax,s in canadain

being a dealer for both fass and the airdog ,i would go with the airdog they are a little less money over the fass ,both are good pumps ,airdog you can get the 150 for the same price as the 100 right now so its a good deal

i would have to agree with moparman the carter pumps are not a good pump see a lot of vp44 pumps turned to scrap over them and there lack of pumping ability there are a lot of pumps out there on the market , but it seems that the airdog or fass are the one,s to withstand the job over time

have a good day ,always a good time when you can get out on the atv take pix lol

lol hi uber how many barrals you want .i can sell you it in 45 gal drums ,5 gal pails , give me a call bob 905-892-9524

arp 10th 5 perma court st catharines, starts at 10.00 amshow and shine,50/50 draw,cash prize,s for most hp,most torque lets all put up a good truck count and make it a annual event

thracing is now the canadain dealer for the dodge replacement apps from tmb manchanical

for all you canadain boys here or anyone going to be in my neck of the woods i am going to hold a dyno day here at the shop for the truck boys , apr 10th, starts at 9 am will run all day stop by check it out have some funbobthracing

filled up and went 939.9 miles yesterday not sure what it works out to but i dont think its too bad for the size of the tank with a cap on it, thruck was loaded one way with 5 bbc race motors =4000 pds

good clutches up too 350hp thet will start to slip after that [depends on the way you drive it ]anything after that you should look at a duel disc setup

depending on the lift kit some kits you have to cut /remove some brackets to install the new ones with the kit if so its better to leave the kit in

my intentions was to share those pix with you guys ,thought you might like them was not looking to be slamed ,but rest asured i will have jim in my office first thing this morning for a chat, never have i had too question any of my guy,s word before but it will be dealt with ,as for the thread you can deleat it moparman ,i would have never posted it knowing it was,nt the truth robert hoover thracing

some of the guy,s that work for me went out at noon today for a rip on the sledsthere is a trail out back of the shop we call the hydro lines ,this is what they run into the deer where not even scared of the guys they just moved over and stood there looking at them as they drove by ,they even would come up to see if you had anything to eat in your hand jim said he counted about 105 total

from my family and all of us here at thracing we would like to wish everyone a safe and happy 2010