
Everything posted by Marcus2000monster
-
HX35 Rebuild
The truck still feels a little sluggish at lower rpms. High rpms and it will scream.
-
HX35 Rebuild
It had a s&b when I bought it. Checked boost leaks and found one good sized leak. Tightened the clamp and also installed DAP boost elbow. Truck seems much more powerful but that could be due to the elbow. I’m going to hold off on rebuilding the turbo for now. Going to do a apps reset as well.
-
HX35 Rebuild
That’s first on the list I’m certain it needs new seals though as there is oil inside the housing.
-
Everyone post a picture of your truck!
Thanks Dave just now noticed my mistake! Lol. I meant paint by the way!
-
HX35 Rebuild
Made it home this morning at 4:30am. Got my kit from DAP on the porch. Any idea how long it’s going to take me? Iv got a lot of stuff to do today and I don’t wanna year into it if I don’t have time.
-
HX35 Rebuild
Anyone here rebuilt there hx35? I guess I’m going to attempt it myself tomorrow. Any tips or suggestions? Hope I don’t mess anything up. I plan to check for boost leaks before I rebuild it. Anyone have a diy tester they have built?
-
Everyone post a picture of your truck!
Couple views from my trip to the BVIs. Not home to post a pic of the truck lol. Beautiful truck man! If I can ask how much was a pint job for that girl?
-
Quadzilla adrenaline V2
If you have the V2 u can tune anything you want. Fast as possible or slower than stock. Go on the downloads section of the forum and there is downloadable tunes there for your Qaudzilla
-
Previous issues and a new noise.
Can a APPS go bad without code? I’m curious if this is part of the low power issue. Just speculating while over here in the BVIs at the hotel. So far the P0237 hasn’t came back since I cleared the code. Turbo rebuild kit should be there when I get home along with a boost elbow suggested by Matt at DAP. Also I’ll be checking for boost leaks. If I do have boost leaks and the low power is from that and a sloppy turbo why the heck would that0237 code have popped up? Also so will my turbo need rebalancing when the rebuild is done?
-
Injector swap
I just pushed mine out if the way and held them back with a screwdriver or a piece of wood. Worked great.
-
To replace my VP44 or no to
Now we need a pic of the new nozzle with the new oil for proof that we should switch to that oil too.
-
To replace my VP44 or no to
Oops I meant the super tech brand.
-
To replace my VP44 or no to
Hmm I’m tempted to try this and see if I can tell any difference. What about ash levels compared to the TCW3?
-
To replace my VP44 or no to
WhT oil are you guys using?
-
To replace my VP44 or no to
Maybe if you have the cash buy a spare to keep around but if your not having codes or any issues I certainly wouldn’t blow the money.
-
Previous issues and a new noise.
Hey I done did that! Haha It was a bit strong but not bad! Lol There is it of hurricane damage here right now.
-
Low end
Thanks for the update!
-
Low end
I suggest updating this thread with more info and all mods and maybe we can help you. The supplied info isn’t sufficient for us
-
Previous issues and a new noise.
I’ll do that! Got to wait till I get home from the Virgin Islands first haha
-
Previous issues and a new noise.
No sir. That’s next on the list. After the rebuild.
-
Previous issues and a new noise.
I wondering that my not be what happened. It ran fine ever since the air leak got fixed. What’s standard pop pressure?
-
Previous issues and a new noise.
I think that’s correct. I may try reinstalling my injectors with the info from the other thread.
-
Previous issues and a new noise.
Sorry guys I had a crazy weekend and didn’t get a chance to work on the truck except to throw in that new MAP. I’m headed to the British Virgin Islands today on a business trip with Dad so won’t be able to work on her his week either. Got the new map in and didn’t make any difference as far as power. I pulled a 30 ft RV last Saturday and truck was pretty gutless especially in a hill. I called up Matt from Diesel Auto Power and he thinks my turbo is not building proper boost and suggested i rebuild it being there is oil inside the housing and some minor shaft play. Went ahead and ordered the kit and hope to get that done next week when I’m home. Truck also has a intermittent very light rough idle again. What can cuase a rough idle besides VP and injectors?
-
Morning Pic For Today...........Post A Pic around your place.....
Currently sitting in Atlanta Airport and there’s a flight to Minneapolis that was over booked. They’re offering 2800$ to fly later today but people are reluctant and wanna get home because of that storm.
-
Everyone post a picture of your truck!
Heaviest load this girl ha pulled since I got her! She didn’t do the best being my turbo needs rebuilt but she made it up he big hill!