Source for a Fuel Module Bulkhead Fitting and Flex Tubing please.

[Leaky88]

Hi,

I'm looking for a single 1/2 Bulkhead fitting and some 1/2" corrugated fuel line.

(ALL items above bracket in pic, less, washers, male QC, clamp and ties. )

Any one know of a source for fittings besides Vulcan?

[Note: Nothing against Vulcan, they are great to deal with, extremely helpful, I can't say enough good about them.

I'm just looking for source closer to me given Christmas mail delays etc..]

Thanks.

 

Leaky

 

[015point9]

Where might closer to you be?

[GSP7]

Glacier Diesel Power

 

Dont know if they have what you need

[Dieselfuture]

I made my return out of jic fittings but it takes a bit more time and ingenuity. The one to the lift pump I did use one from Vulcan because it clips in place of factory pump and travels up and down with the basket. My return is aluminum cut short maybe 1/2" of bottom. That was before they offered 2 fittings in one kit.

[GSP7]

Is that some kind of in-tank hot-rodded set up?

 

I like JIC fittings, Got 'em on my truck.

 

Im not sure about the fittings Airdog uses, quick disconect plastic & O ring stuff ??

[Mopar1973Man]

Talk to Eric at Vulcan Performance. he would know.

http://www.vulcanperformance.com/

[dripley]

I would definitely call Eric. With Chritmas and all he can probably get them to as quick as anyone. Unless you know someone who has them on the shelf in Il.

[Leaky88]

Thanks guys.

I contacted Eric and order has been placed with Vulcan.

I cannot say enough good things about Vulcan and Eric is great!!!

 

Leaky

[Mopar1973Man]

1 minute ago, Leaky88 said:

Thanks guys.

I contacted Eric and order has been placed with Vulcan.

I cannot say enough good things about Vulcan and Eric is great!!!

 

Leaky

 

Might go to his forum and post your comments there.

https://mopar1973man.com/forum/151-vulcan-performance/

Edited December 18, 2017 by Mopar1973Man

[Leaky88]

13 hours ago, Mopar1973Man said:

 

Might go to his forum and post your comments there.

https://mopar1973man.com/forum/151-vulcan-performance/

Done!!!