Hi,

I'm looking for a single 1/2 Bulkhead fitting and some 1/2" corrugated fuel line.

(ALL items above bracket in pic, less, washers, male QC, clamp and ties. )

Any one know of a source for fittings besides Vulcan?

[Note: Nothing against Vulcan, they are great to deal with, extremely helpful, I can't say enough good about them.

I'm just looking for source closer to me given Christmas mail delays etc..]

Thanks.

 

Leaky

 

Where might closer to you be?

Glacier Diesel Power

 

Dont know if they have what you need

I made my return out of jic fittings but it takes a bit more time and ingenuity. The one to the lift pump I did use one from Vulcan because it clips in place of factory pump and travels up and down with the basket. My return is aluminum cut short maybe 1/2" of bottom. That was before they offered 2 fittings in one kit.

Is that some kind of in-tank hot-rodded set up?

 

I like JIC fittings, Got 'em on my truck.

 

Im not sure about the fittings Airdog uses, quick disconect plastic & O ring stuff ??

Talk to Eric at Vulcan Performance. he would know.

http://www.vulcanperformance.com/

I would definitely call Eric. With Chritmas and all he can probably get them to as quick as anyone. Unless you know someone who has them on the shelf in Il.

Thanks guys.

I contacted Eric and order has been placed with Vulcan.

I cannot say enough good things about Vulcan and Eric is great!!!

 

Leaky

1 minute ago, Leaky88 said:

Thanks guys.

I contacted Eric and order has been placed with Vulcan.

I cannot say enough good things about Vulcan and Eric is great!!!

 

Leaky

 

Might go to his forum and post your comments there.

https://mopar1973man.com/forum/151-vulcan-performance/

Edited December 18, 20177 yr by Mopar1973Man

13 hours ago, Mopar1973Man said:

 

Might go to his forum and post your comments there.

https://mopar1973man.com/forum/151-vulcan-performance/

Done!!!