Royal Squire

If you don't mind my asking, what's a good deal?

If you fill out your signature (year of truck, options, add ons, mods, etc) it will be very helpful to those who are "in the know"

You can usually negotiate prices as well

I see used name brand drills at pawn shop for cheap. You can try before you buy. I bought a used Skil 1/2" drill a few years ago for $35. Works great.

A burden that I could probably deal with!! Haha

Sweet! Happy Birthday

Wish you a long and happy life together

Careful with those knives

Accuracy of temp gauge?

If you have a deep pan, could the extended pickup be leaking?

Congrats! Food sounds mouthwatering.

Thank you AH64 for filter info. Very helpful.

Sorry to see this. Gotta love those roundabouts!

What is difference between DBL 7349 and ELF 7349

A much better way of explaining what I was trying to say

Almost looks like the tone ring isn't on carrier square. Like it has shifted to the left

Does anything on trailer lite up when you turn your head lites on?

Which style injectors are the factory originals?

I have used 3m super weatherstrip adhesive on other vehicles. Especially where screws go into metal u-nuts. It doesn't harden and sticks very well. May work on plastic.

Thank you for the explanation. I was wondering the same thing.

Thanks for your help. Put a little in sig.

Truck is running great after replacing crank sensor

Don't know how to fill out signature. Sorry

On older models of most anything you can check the gauge easily. With key on disconnect wire at sender. Gauge should go completely one way, then ground the wire and should go completely the other way. This also checks your wiring. Hope this helps.

Been back from my trip since Sunday night. Busy with work till last night. Disconnected batteries and replaced crank sensor, hooked up batteries and reset APPS. Engine started right up and cel was gone. Will test drive today. On my trip home, with 150 miles to go, 10:30 pm in a town that was asleep I shut truck off and wouldn't start. Also saw a couple of times tach wasn't working during trip. Wanted to remove crank sensor, but couldn't get starter bolts loose. After an hour it started!