2nd Generation Dodge Reliability / Performance

Ive have searched High and Low and can Not find an answer to this. But to make sure I understand. I have a quadzilla adrenaline V2 installed in the truck. I have tried to make it high idle with parking brake ect. when it was cold as ever. No high idle I have purchased a Moparman high idle switch from DAP and look to install it. Can i install it with current quadzilla plugged in everywhere? And If i need to flash the Computer to enable high idle either with a smarty or a dealer.... can quadzilla stay plugged in? If this is a dupe post please let me know. Thanks for all the infinite wisdom you guys have on here. Finally signing up Truck i…

So I’m looking to sell my truck. I found another 01 with only 168,000 miles. So what I’m asking is how do you price a high mileage truck like this? It runs great and has no issues. 316,000 miles tho. Overhauled transmission at about 270,000 raptor 150 s&b cold air intake edge ez

This happened the other day to the screen, I tried to reflash but it won’t even connect anymore (updated it in the past) So... my question is could I Go a head and update the adrenaline to v2 and it still work (in stock mode I presume) until the iquad adapter comes in? https://imgshare.io/image/GREnc

Hello everyone. I have a question hopefully someone has an answer. I recently purchased a quadzilla for my 2001 24 valve. I purchased a tune from this page and I can’t get it to import onto the quadzilla app. I’m on an iPhone through WiFi. Any suggestions?

Being a 2nd gen owner and living in Northwest Ohio I have some rust on my truck. Most do around here. I have been reading, searching and reading some more about rust prevention. I have some rust on my '01 3500 that will get repaired/replaced with new metal but I am curious to see what everyone on the site here is doing to prevent this vehicle eating monster from getting their truck. I have read that an oil based undercoating that is applied annually seems to work pretty well. It would have to be included in your maintenance program in the fall for winter preparation but has been pretty effective. There is also a DIY variant that could be done at home with used motor…

Iam new to the diesel world,i read your article on adding 2 stroke oil for every fill up it says a 128:1 ratio,does that mean 128 ounces for every gallon you also said if you fill up 20-25 gallons you would put 20-25 ounces in?Iam a little confused on how much i should add to my tank.

I have an Isspro 0-40psi gauge that works perfect. Only removed because it didn't match my other gauges. Used for about 10 months. If you need it give me a fair offer.

Hey guys I'm back! Crazy year, didn't have much money here lately but started a new job and I'm back! Anyways, I received the Quadzilla for my 01 a year ago for my birthday and I was super excited because for once I'll have custom tunes and I will be able to get out of the <15mpg that I had been getting with my Smarty S03.... Boy was I wrong..... Year later, mileage still sucks. NEVER got above 15mpg, no matter if I ran a tune of my own, or one of Mike's, Me's, nor Drips tunes. I'm at a loss from where to go from here. With my S03 I got 18mpg ONE TIME so I know its possible, but I've never been able to break that mid 15mpg mark. All I have done motor wise is 100hp DAP…

I just bought a quadzilla adrenaline for my 2001 dodge 24 valve. I got the WiFi for my iPhone. Everything is hooked up and plugged in correctly. I went to go and try to pair it up to my phone through the WiFi like the manual says. And nothing is popping up. Has anyone had an issue like this before? I read that sometimes the module isn’t getting power so I tested that and it’s getting power to it. It just won’t pop up on my side. Any suggestions??

Hey gents, having an issue with my iQuad BT. I had Quadzilla update the box to the v2 tuning and I have the correct V2 1998.5-2002 vehicle profile selected. I've purchased a tune or two off of the Quad Downloads section and it won't allow me to select it. This is an issue for me on multiple devices, they're all .json files. One of the tunes I was able to select but once I open it with the Quad app the whole app crashes. Is there a way to manually open up the tune file and manually input them into my app? Anybody run into this issue before? About ready to ditch the iQuad and go back to an Edge... Here's a screen shot of the what it looks like

Hey guys just wanted to share a video I made.. not sure if this is being posted in the right location or not. I made this video to help people decide if they want an edge juice with attitude CS2 or CTS2. Also for people who have it and aren’t quite sure of its features and how it all works. I also did a 0-60 stock vs 0-60 on 5x5 to show its performances Gains on a slightly modified 24v Cummins. If you guys enjoyed then check out my other Cummins videos and don’t forget to like and subscribe. Thanks! VIDEO: Forgot to mention... for those who just want to see the comparison for stock 0-60 vs edge Juice on 5x5 Sk…

I put down a number I am pretty impressed with last weekend. Now we are debating on trying to make it to 750hp on the SO without nitrous. A friend of mine thinks we are already pretty close to the highest power SO pump. So I figured I’d ask you guys since this is probably the biggest active group of VP guys. Dyno was at an old gasoline hot rod shop so it was only set up for 1,200 max torque. FullSizeRender.mov Oh and the tach pickup kept falling off which is why torque drops off on both pulls and print out is in MPH.

Has anyone knowledge on other applications for this combo, like JD6068.

Had some good luck in the last 3 weeks and I suddenly have money for a Quad and I have a few questions. I have a fuel pressure gauge in the truck already so is there any real reason to get the fuel pressure sender for the Quad? I have RV275 injectors and a stock HY35 with a spring on the waste gate and make about 28 psi max. Trans has a stock rebuild on it done about 25,000 miles ago. I'm not looking to make 500 hp or anything I just want 275-300 hp. The most important thing right now is fuel mileage. I'm getting 12.5-12.75 right now. Is there a tune on here that anyone would recommend for my combo? Is there anything I n…

Anyone tell me what these two ports are for on a Aurora 3000?

I couldn't find a way to mount my tablet that i liked so i made one. Got a tablet mount from Wal-Mart online for about $9 that is for bike handlebars. 2 1/2" conduit clamps, about a foot of gray electric conduit and a 90° elbow. I didn't glue the elbow so it will rotate and can be easily removed. My center seat is a sub box & I screwed it to the front edge. Works great, really stable. Also works good for a phone holder.

Hello I’m going do this mod but have a question I don’t have a Passenger side battery and was wanting to know if I needed to run a hot wire on top of radiator to hot side of drivers battery to hook Alternator wire to? i have the hot lead that came off factory set up from passenger battery that I have the grounds hook to now that I need to put on injection pump side for new grounds! I could make a longer cable to replace my ground now for the Alternator. And what do u do with the factory Alternator wire in the harness cut it off? Or could I just do the grounds and leave the Alternator wire in harness or is that the wire that carry’s the …

Big night last night for Big Brown. She got a quadzilla with stealth cover, tranny flush with amsoil, replaced my leaky cracked oem wheels with a set of 17” 4th gen wheels that came with good used hankcooks for $150! I did hit a couple snags though. Anyone ever seen where a BD boost elbow is too large diameter and won’t thread into the turbo? Also for most of Me78569 how much fueling should I add for 3500 ft? I took the truck for a spin at 1am and didn’t have quite the punch I was expecting from a few of the tunes. PS ignore the mess, I just moved in and still organizing things and doing some renovations

So if your running a junky edge comp or juice and want just a little more fun, this is what smoke out put you can expect with a 90hp 7x.0085 VCO injector from DAP. Clean burning and sensible injector for a well balanced rig. Pop pressure on this truck is 300bar. Truck setup: 99 model year, fass 95, edge juice (same program as comp), 4” exhaust, HX35W, garbage jasper trans, triple disc, 4.10 gear. this specific truck doesn’t have the pump tap installed due to a new VP44 installed so this is just stock, level 1/sub 1 and level 2/sub 1 for low smoke and smooth acceleration to keep traction under control. With levels 3-4-5-6 with the pump tap of cours…

First off i just purchased this quadzilla adrenanline v2 from power driven diesel installed it last night and only had some connection. Im using the bluetooth device with my samsung table. When i open the app it does not allow me to make a vehicle selection i just get the demonstration selection and nothing else. The ecm voltage stays at zero. I unplugged the datalink port and it has power unplugged and plugged in to the quad via multimeter. Could the reason be im not getting signal is because i cant make a vehicle selection because there arent any options? I did get some connections like egt temp, engine load,rpm etc. I think i also killed my vp44 after running it with …