2nd Generation Dodge Reliability / Performance

$150.00 totle cost. THE 5'' STACKS ARE STAINLESS AND CAME FROM EBAY. COST $100.00 The crossover came from scrap yard $15:00. 2 band clamps cost $12:00.The elbow came off of a old pipe I had. The section of flex pipe cost $21:00.

I was wondering what you guys thought about the new quick connect system? It looks like the push lock system is a better deal. Also wondered what thoughts were on hooking the power to alternator or battery? Over all looks like a great system.

Dodge says the first major overhaul is at 300,000 miles 350,000 for the newer commmon rails what does this mean I dont know of anyone on this site that has done this do you even need to do anything I plan to adjusting the valves, replace the oil and waterpump's and pulling the head to inspect for damage/wear what are your guys opinions? sorry if this is in the wrong place I didnt know where to go with it.

Bought a used Edge EZ a few months back,worked fine then all of a sudden quit. Is there any thing I can test other than for a broken wire before I send it in.

Hey guys Anyone know where to source a turbine wheel for a HX35 Good USED is best else NEW ? thx

Ok guys I am looking for a set of 285/85-16 tires to try out on my truck and I cant seem to find them? So who knows where I could look for these? I have searched discounttiredirect and tire rack and did a google search and nothing?:banghead:

CuriousHow do you control BOOST on these ???

I am looking to put around 75 hp injectors in my truck. what is the best and what is the worst brand, and has any one had there stock injectors rebuilt to 75 hp. I have a friend that has his stock injectors that I can rebuild and give him my set after we install them. Thanks

I have code 0336. Can somebody tell me what it is? I picked it up with the Scangauge, it didn't show with the key trick. A search here didn't produce anything. Thanks

So what should I know heading into this project? I came across this somewhere (maybe it was even here somewhere, can't remember) and wonder what you guys say about it. http://www.turbodieselregister.com/tdrarticles/tdrarticle53_fromtheshopfloor.html I plan to go with Moog parts. What about the alignment, I understand that getting things set precisely is important on these trucks. I have a serious wandering problem and hope to gain a lot of ground with this problem.

CajFlynn, How many miles?????? Keep on truckin'!!!

Here are some pics of my truck.

My 2002 HO cummins had a catch can off the oil breather on the front of the engine. I was sick of forgetting to empty it, then dripping all over my driveway, or spilling when changing. I just extending the hose down past my axle. It coated everything down stream of it with crud, but it seemed to work (only dripped a little). Last summer I nearly overheated when towing and I'm blaming the problem on oil vapor getting sucked into the radiator (I read this happens with the stock setup). I've looked at the different options available to get rid of the crankcase vapor and I want to try an evacuation system. I like this because the vapors stay vapors and exit with the exhaust,…

quick question ..does any one know at what point the stock turbo hx 35 i think needs the waste gate hooked back up if at ? i havent made any huge performance upgrades yet ..just a few minor ones but i know at some point i will need to think about getting the waste gate working again to keep the turbo safe

Ok guys I have 315-75's on my truck and I believe that my mph is off about 13% so if i am trying to calcuate my correct mpg would i take my total mpg' per tank and multiply by 13%??? :shrug:If i am thinking right this should give me an accurate mpg. Any help is much appreciated.

I have 130, 000 miles on the truck in my sig with the stock transmission. The transmission doesn't seem to be slipping, but if I upgrade to 100 hp sticks can I get away with just a converter and valve body from a reputable company like dtt.

Photobucket Album

Look at this neat video that I ran across!!! I wonder what it takes to complete this swap??? Sorry I'm not sure where this is suppose to be posted but it is neat!!!

I am sitting on thew side of the road with no power. every thing works but the engine want run. it just shut down while driving. I have a p1694 and that is all. any body got any ideas of where to start?