Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

PUSHLOCK HOSE TOOL

CUMMINSDIESELPWR
 Share

Recommended Posts

  • Popular Post
KATOOM

KATOOM

Posted
  • Popular Post
Posted (edited)

Pffffft.....  Who needs one of those fancy tools.  Assembly is so easy, especially when you can easily stink up the house warming up a can of engine oil on the kitchen stove and then simply dunking the end of the hose for a few minutes.  You'll only pop a few eye blood vessels and hopefully not blow though your shorts as you soil yourself trying to shove the two pieces together with all the strength you can muster.....generally resulting in a small gap between hose and fitting as you near the end, followed by some harsh language.

Maybe I do need one.

Edited by KATOOM
  • Like 6
Link to comment
Share on other sites
Dieselfuture

Dieselfuture

Posted
Posted

Nice tool, a must have if you have extra cash.

Here is another tool to have, http://www.handsontools.com/Mastercool-71475-Universal-Hydraulic-Flaring-Tool-Set_p_2039.html

Much cheaper on ebay, this one has pictures of different flares. 

My daily driver has bad brake and fuel lines discovered after I changed rusty leaky fuel tank. So instead of trying to piece things together with random fittings I bought 2 coils off line 3/16 and 5/16 I'll be able to make flare and quick-connect fittings all out of one line without  splices. Plus I was planning on redoing the brake lines on my truck hope this thing works as advertised. I actually bought a flaring tool before that was Calvan. Sold it to a friend.    https://www.walmart.com/ip/Cal-Van-Tools-165-In-Line-Flaring-Tool-For-3-16-To-3-8-4.75MM-To-8MM-Makes-Single-Double-Or-Bubble-Flares-Case/49773827?wmlspartner=wlpa&selectedSellerId=1397&adid=22222222228037422383&wl0=&wl1=g&wl2=m&wl3=85501913930&wl4=pla-193583642690&wl5=9018697&wl6=&wl7=&wl8=&wl9=pla&wl10=112550031&wl11=online&wl12=49773827&wl13=&veh=sem      and it did good double flares, butt bubble flares little bit ugly. And it wasn't able to do Quick Connect fittings. You can find better deals im sure. Though I'd share. 

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...