Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Towing a 24 valve truck when broke down


Recommended Posts

The transfer cases have an oil pump that is run by the output shaft so if the driveshaft is turning the pump is working. Put the TCase in neutral and nothing but the output shaft will turn.

  • Like 1
Link to comment
Share on other sites

  • Staff

Yep front would be on a dolly because of the slide in camper height. Thanks all. I ask cause trucks been smooth running on the 0216 code for three-4our yrs now. Just a matter of time I guess.

Edited by JAG1
Link to comment
Share on other sites

  • 3 months later...

Not sure how I got here, but one more thing to remember. Plug off exhaust with rag, so some how it doesn't draw air out of it and spins turbo, bushings/bearings might fail in turbo if it does spin when in tow. we did it with Duce and half's when using tow bar, or on flat bed.   

Link to comment
Share on other sites

  • Staff

Not sure how I got here, but one more thing to remember. Plug off exhaust with rag, so some how it doesn't draw air out of it and spins turbo, bushings/bearings might fail in turbo if it does spin when in tow. we did it with Duce and half's when using tow bar, or on flat bed.   

That's a cool thought. I think many of us can appreciate this. Thank you.

 

 

So bring big potatoe for pipe stuffer. Just don't forget and leave it in :wow:

Link to comment
Share on other sites

×
×
  • Create New...