2nd Generation Dodge 24 Valve Powertrain

My speedo still works so am guessing the rear sensor is still good, not a fuse prob., so I am going to take the sensors off the front of my ,wrecked 2000 3500 with auto, parts truck for me, and try them on my truck. Does anyone fore see a problem? Thanks

well we have a list of the best oil filters from AH64ID...so i am interested in who has the best fuel filters for the vp/24 valve trrucks...if possible the % and the micron would be sweet!!:thumbup2:

Has anyone ever ran Prist for a antigel??? My truck gelled up over the last blizzard that we had here in souteast kansas and after 24 hours of letting it sit with some 911 in the tank it finally started. Just wondering if there is a better antigel out there or maybe even a fuel tank heater.

Hey guys, need some help with and 01 2500 4x4 reg. cab 151000mi. my first problem is with the track bar. Bought a truck from an auction, had no track bar. On a budget so went to advance auto parts got an oe track bar, truck has a leveling kit on. Anyway the ball joint end that attaches at the frame doesn't seem to seat correctly its like there just not enough slack in the ball joint. Am I doing something wrong or am I fighting the leveling kit and need and adjustable track. Really thought its would work with just a leveling kit? Tryed everything I can think of it just will not seat correctly you can get the nut started but it dont lay flat if that makes sense. Second prob…

Sorry I am new on here but have been on other sites that told me things that weren't exactly right. Just if someone is wondering the VP off a 2000 (so) with auto trans. will work on a 2001 (ho) with 6 speed. I made the switch about 500 Miles ago at first I thought it was the IP and swaped the pumps, it turned out to be the APPS. The pump off the 2000 (so) works just fine on the 2001 (ho). '

The MIL was on the other day, after I ran out of fuel. Apparently my draw straw starts to suck at ~1/8 tank indicated... anyway, I thought it might be related to that, but I just hooked the scanner up and got:P0122 - Throttle Position Sensor Circuit Low VoltageP1689 - Delivered Torque Circuit FailSo, experts, what's the scoop?

Since my tranny blew the torque convertor I am forced to do another total rebuild on it. My question to you guys is that people are saying that the second generation automatics 47RE's are only rated to pull up to 30,000 pounds, with a built transmission? It seems kind of low. Any thoughts??

In northern Canada we get weeks of -20 to -35 celsius my body told me Ishould use regular 10w30 gas engine oil better on start up,he said I should stick to 10w30 as I won t be pulling much,I ll be using the truck mostly for hunting & fishing,What s best??

Hey guys sitting here freezing, thinking about summer and truck pulling. Wondering if there are any good suggestions for a front weight ballast on the 2nd gen trucks, something that can handle 1500lbs and be removed from the truck. Thanks!

I am a newbie here but I have been reading for several days and most everyone can only get maybe 18-20 mpg out of a 24v. Trying to figure out how my truck gets such good mileage. Can get 24+ with a steel Knaphiede bedcover that wieghs 1200#. I AM NOT COMPLAINING!!!!!! Just trying to figure this out... No electronics on truck. tires 245/75-16LT 3.55 auto

Well the guy that was going to rebuild me a short block fell off the edge of the earth I guess. No price quote no phone call no go jump in the lake no nothing. I have just about had it with people saying I will call you back. Dont lie, just say you dont give a s--- and be done with it. Two weeks wasted, so I call Cummins and they dont sell short blocks, another lie. We all know cummins sells short blocks, anyway he wonts to sell me a long block for 6020.00:mad: Man, I am about to go out and buy me a Sherman Tank and do like that guy on wacked out video's:lmao:

Does anybody know the voltage when starting .When I turn the switch to on I m picking up 12 volts for 2 seconds & then it drops to 8 volts? Then when I turn the switch to start & let go I get 12 volts for 25 seconds then voltage drops to 8 volts? Why does it drop to 8 you would think it should drop to 0 volts.These test are done at the transfer pump connector.

Yesterday I had a horrible vibration while braking so when I got home I pulled the front tires and found my pads and rotors where shot. I've only had the truck a little over 6 months and never checked them (my fault).So, I went to NAPA and spent $250 on rotors, pads, seals, and grease. I started w/ the passengers side first since it was the worst. I cleaned and repacked the wheel bearings and installed the new rotor (my truck is 2WD). When I went to install the new pads and the caliper they simply would not fit. I compressed the piston in the caliper w/ a c-clamp as far as it would go and still couldn't get it to fit. Now I'm thinking my caliper is bad, the piston i…

Well life officially sucks again ....the transmission started acting funky last night on the incredible hulk ...ie not wanting to go into second gear ..my normal takeoff gear ..raking bad in third and the only way to go into reverse was shut the truck off put it in third then restart ...so no hulk for me for at least a week the local shop guy says 1500 for a rebuilt five speed ..but he might b able to crack mine open an fix it for about 900 ....any thoughts or ideas ...on price and what might b wrong :banghead::banghead:

My wheel bearings are shot and I'm having trouble finding the right ones. My truck is a 99 and has front ABS, is this unusual? Th person at hub and bearing warehouse didn't know that 99's came with front ABS. Would bearings for a 2000 work?

Ive been having this problem for months now with my '99 Dodge . It comes and goes, but what happens is all my gauges quit working, "Nobus" shows in the odometer, the truck quits charging, it shifts funny. Me and my buddy have been all thru this truck, all the grounds are good, I checked the plug in the fuse box thats under the hood, and I checked the ignition switch. The code I get from the OBD is P1698 and if I do the Actuator test for the insturment cluster I get codes 920 and 921. (when this truck was at another garage they had the pcm off and opend the back of it) Anyway im positive its the pcm thats bad, and im going to order a new one monday unless someone here thin…

I got a chance to meet up with stodg73 and upload the High Idle feature on my truck today after work. Thanks for helping me save $90 that the stealership would have charged, your bada** man! I can't wait to see how it works.Again, I would have bought the breakfast if time wasn't an issue, and I apolagize for the long wait. :)Thanks again, I appreciate it very much!

I was driving down the road last night and heard a big bang. I thought by the sound that I hit an animal. The truck seemed to loose power after that. Today I noticed that there is tranny fluid coming out the front of the tranny by the torque converter. Can anyone give me some insight as to what could have broke or gone wrong.

OK.......... I have a Superchip Programmer, it came with the truck. I put the truck back in stock mode and had the high idle turned on at the dealer it worked fine while in stock mode. I put the tuner back on the truck and the high idle didn't work. Figuring that the tuner screwed something up and already paying $90 for the dealer I just gave up on the high idle.Fast forward to this winter. I decide to just go and have the dealer re turn the high idle on. I make an appointment for this morning and head to the dealer.The service manager comes back and gets me to show me the "flash" has already been done. I tell him yea I know it has, I had it done here. I also tell him tha…

Gentlemen, I have perused the different threads and may have possibly missed the subject. What is a logical progression for increasing HP and / or Fuel Mileage on a 24V In my case I am looking for both, power (I haul hay from the field on a 30' gooseneck) and Mileage, just cause it's gettin' 'spensive! I'm working with a 2001, 2500, 4WD, QCSB, Auto, BHAF, Straight exh., 135K mi., front end has been done. My initial sense and conversations have led me to believe that three things lead in any project.1. Air intake = BHAF2. Exhaust = opened up and increased in size depending on the extent of the project3. A fuel additive = 2 cycle oil etc. 4.?:broke:5.?:broke:Etc.:broke: Wh…