2nd Generation Dodge Reliability / Performance

6spd 4x4 ext cab shortbed all that good stuff, the minor things ive done to it are in my sig heres a some pics from the day i bought it all the way to present day. The aweful process of dechroming the truck lol After rhino lined rockers and tow mirrors As it sits now Road Armor front bumper, leveling kit and some 315 Hankook dynapros -Jordan-

I have hauled some heavy loads over the last hay season and I think my miss guidence from other people have swayed my beter judgement on EGT. Loaded or unloaded I dont exceed 1200*. I had 2 1600* mishaps unloded. I know that people will say that 1500* for a few seconds is ok and others say don't go over 1000 hauling heavy loads. What I would like to know is 3 figures..Unloaded sustained temp*Unloaded Max few second bursts*Sustained loaded temp*I wont hold you to the temp but I am curious on what people are running. This is all pre-turbo readings.

HELP!! I can't figure out how the heck to get the p7100 pump out of my 96 Cummins!

ETA: Update in later posts. Edge not most likely culprit! ---Rant part.Well, Guys, I need to vent. And if you have any suggestions, I am interested, because as soon as they will cut me a check for their un-fixable product, I am going to go with something else. I have had it with Edge Products Juice CTS. I have had this chip for 6 months and it has never actually worked, its been through (from Edge) three Juice Modules, two CTS modules, a new wiring harness (complete) and its been RMA'ed back to edge once for them to work on it. They said that they found an issue with it, and that it should work and sent it back to me. It got back without the pressure transducer that …

I know my heavy 19.5's are dragging my milage down, but what else works?

Hey guys was just looking on you tube and saw some guys are making home made controllers for the 351 ve, dose any one have any experince with this, good, bad, or anything:shrug: thanks:thumb1:

Hi guys, I've been lurking and learning on many forums. I got my truck back in August of '10, but I've learned slowly along the way. I love the truck and know there are things I'm needing to do to it, but I got hurt and sadly it took a back seat to so many things and then other stuff came up. I'm trying to catch up. I've got a leak inside that I noticed. There is a streak on the rear glass where it runs down. There is a little brown staining on the headliner on the passenger side. I don't know if there is a possible seam breach just back of the door on the roof, or if (in my opinion more likely) the cargo light that is on the back of the cab is leaking. If …

Question - does the chip matter when deciding between 100 and 150gph lift pumps? - If so, is it possible to figure out which chip/hp rating is installed? I took ownership of my truck in 2007, it belonged to my ex since 2005. He put a non-adjustable chip in the truck while we dated and shame on me for not remembering which one it was... I desparately need a new lift pump and afraid to buy the wrong one!

Hey guys I think I am ready for a turbo upgrade but don't want to get crazy. Thinking of having my turbo made into a 35/40 hybrid. Any pros, cons advice would be great thanks:thumb1:

Any one ever use one of these if so whats your opinions ? Torque Converter Lock-UP The TS Performance Torque Converter Lock-UP allows you to lock and un-lock your torque converter at the speed of your choice. Most factory converters lock up at high speeds, and un-lock when off the throttle. This can cause increased temperatures due to friction between the converter and flywheel. It will also inhibit vehicle performance and fuel economy lock at high speeds. The converter can work in conjunction with an exhaust brake to help slow the engine speeds instead of relying completely on the brakes to slow the truck. By programming the conv…

The latest edition of Diesel Power Mag has an article on methonal/water injection. It focuses on improving emissions but also implies power improvements, lower egt's and better fuel economy. But as with other technical articles they give very little to no actual quantifiable data. Sometimes some graphs and pictures but it would be difficult for you to justify the install based on what info they provide. I am not looking for power increases or lower egt's as I am happy with my truck for how I use it, but I would like to pick up some additional economy improvement. "Snow Performance" advertises 6-12% better fuel economy on their "Tow-Max". There are 3 or 4 major manufact…

Raptor 150 with Glacier Big Line kitISSPRO Fuel Pressure Gage19.5 Ricksons with BFG's

I recently tried to change my power level on my comp box and nothing would happen. If I disconnect all my connections, but leave the power going to the box I can change the levels. Any thoughts or suggestions?

I keep debating on whether or not I want to potentially screw up a good thing by installing some injectors to help with towing a little and possibly gain a mile or two. I have no intentions of anything over 75 hp sticks and I was even thinking of keeping it simple with some RV275's. But this isn't a "which injector is best" thread. What I'm wondering is how much HP has anyone put on the OEM 5 speed clutch before it started to slip? I dont really want or have money to justify purchasing a new clutch. So for this reason I have done nothing but if I could get away with some RV275's and keep from changing the clutch then that might work for me.

i filled my tank up the day my tranny crapped out. so it is sitting in the driveway with a full tank of fuel. it could be a couple of months before i get it back on the road. how long can the the fuel sit there before it degrades and is there something i can doto prolong its life? really dont have anything else to run it in.

Heydumb question - but curious on ideasOne of the bolts at back of my transfercase is leaking more ATF. Its one of the black hex bolts that holds the tail housing (where rear drive shaft goes into) to the main part of the TC. So what are easy fixes options ?? Was thinking1) New bolt ....... *shrug* might provide a better seal2) Some gasket maker ?? But thinking most will come out when I torque it down ? 3) Some thread tape ?? Seems to be a good seal elsewhere with no leaks .......

I got my DSV and the grommet ripped on the DSII while dropping the tank. I emailed Vulcan for info as well but what would be a good way to seal the hole up? Its roughly 1 3/8 diameter. Obviously it needs to be diesel compatible. I am thinking I could use it as a hole to refill the tank from my bed mounted aux tank, which currently uses the vent tube.

ok so I was talking with a friend of mine and we were thinking about trying to build a twin setup and I am having a problem finding a hotpipe for this? So does anyone have any tips or know if the S400 has the same exhaust housing? thank you.

we have had several discussions here about coolant temp here. i for one have had a problem keeping the temp up for quite a while. i have replaced t stats only to see them work for a short period. i finally replaced my radiator cap and that seemed to work. but about a month ago the same problem came back. i replaced the t stat again with one from napa. this one did nothing differant. on initial warm up the temp will go to 190 then drop down to about 165 and bounce around 165 and 175 in town or on the highway. it has been like that for a long time. i just installed my AD 165 and on initial start up it warms up to 190 and stays there just like it used to. what in the world w…

So I am planning on doing a little work to my truck and I am looking for input if I forgot something, or have a half-baked idea. :cookoo:I have a 4" exhaust brake and I am looking to upgrade my stock truck with the following:- Super B twin turbo- Exhaust manifold- 5" Exhaust with the brake on it- 150 CPP injectors- I think I am going to go with an edge chip, not sure about the quad- Propane injection- Head studs- Southbend clutch- Upgraded lift pumpNow my first goal will be to get the turbos on, my old turbo is not long for the world (lots of play and oil is leaking from it). I should be fairly straight forward, off with the old on with the new.Parts needed:- Head studs- …