Alright gang,

 

We are in the process of making a new Mopar1973man tshirt, but we need to find a good truck image for the front of the shirt.    

 

The image should be simplistic, the fewer shadows / reflections etc in the image the better it will be.  It should also be a angled image of the truck so the grill and bed is visible.

 

 

So lets see what you guys have.  Post up a picture of your truck and maybe your truck will be featured on the new shirts.  

Edited January 14, 20169 yr by Me78569

What about a bedlined truck on 35's with 5" black mitre cut stacks?

3 hours ago, CTcummins24V said:

Before I got my tow mirrors and the way it looked on the lot in Louisiana...

 

Are those Ford alcoa rims?

I can tell that they are and they are the best 16 inch rim ever built. I have a set on my 1st gen and my 2nd gen with a spare set in the garage. Folks don't know what they are/ sell them too cheap. They are $280.oo a piece brand new

I like the direction you guys are going for the T shirt truck. Would like to see mountains in the background like the old one.

They are cool rims.  Very classic dodge.  They do crack eventually though.

4 hours ago, CTcummins24V said:

Before I got my tow mirrors and the way it looked on the lot in Louisiana...

 

Are those Ford alcoa rims?

CSM we are referring to the rims featured more near the beginning of the thread of the all black truck with the regular size cab. Those are the very special Alcoa rims. They hardly ever fail to my knowledge and are far superior.

I must say too that the Dodge center caps do fit with the Alcoas with a minor amount of remodeling.

Sorry about the off topic I always get side tracked.

Edited January 15, 20169 yr by JAG1

Any update on this!? I want a shirt!

I want to do the shirts but I'm not seeing much for the sticker sales... I was hoping to see better sales of sticker and badges. Kind of hard to drop serious money on shirts if  having hard time getting rid of only 10 stickers.

Yep

Stickers don't interest me, I've never been one to put one on my vehicle.  I did buy a stainless steel logo that is stuck to my tail gate.  A t shirt is more appealable to me...but that is just me.  I understand your concerns of dropping coin on a bunch of shirts just to have them sit around....I do have money in hand that I would like to drop on a high idle switch....just sayin'

Problem is not so much the artwork. That I got a fair quote on be done. The problem is making an order of shirts so if I order say 10 of M, L, XL, XXL, XXXL I'm looking at a good sized bill for product then there is no promise that I can sell them. Bad part is we are hung up with the high idle cable right now and I really can make any more moves till I get the cables and get some sales going. Take a peek at donations there is only $70 this month in donations. So paying site bills come first. 

yea,

 

We were doing good on donations then BAM no more.  

 

Hawkez,

 

we are all jonesin for the switches but all we can do is wait,ugh

 

I hear ya about the shirt orders. I like the stickers but like Hawkez said, I've never been a big sticker on the vehicle guy. 

You could take pre orders on the shirts to feel out how big of an order to get

1 hour ago, Mopar1973Man said:

The problem is making an order of shirts so if I order say 10 of M, L, XL, XXL, XXXL

Get the design done and go with two common sizes L and XL.  Have production run on the other sizes when pre orders reach the amount needed to justify the expense.  

I am overdue my donation, I've just been waiting for to order the switch.  I am waiting patiently.  Can I preorder it?  I'm not in a big hurry to get it in, but I would be happy to put the money down now?

I've got the switches but no cables. 

 

IMO I say keep the shirt the way it is! Unless you reaaaally don't want your truck on there anymore, I'd say just reproduce the same shirt!

My only suggestion would be to offer a darker color, like black or dark blue and instead of the main art work being on the front, have it on the back. But that's just my

15 minutes ago, notlimah said:

IMO I say keep the shirt the way it is! Unless you reaaaally don't want your truck on there anymore, I'd say just reproduce the same shirt!

My only suggestion would be to offer a darker color, like black or dark blue and instead of the main art work being on the front, have it on the back. But that's just my

Colors have to be careful with because if the shirt color is right I can eliminate on color and reduce the cost of printing the shirts. As for front or rear we can pick or maybe vote on it.

Dang... I love the truck just so much black it will lose detail like the hood, grill and every will wash together. Another spot would be the black on the tire and wheels.

i tried lol