About to pull the trigger on a new gear from one or the other vendor. Blue Top is cheaper but my question is does BT have ball bearings in theyre boxes? I know redhead does and i just drove a 12V at work with a redhead and it drove like a dream! Iv heard customer service at redhead isnt the best? Who has BT and who has RH? What are your thoughts?

Got my new box installing tonight! 

Now you can keep it on the road with that qwadzilla taking over your truck 

2 minutes ago, Dieselfuture said:

Now you can keep it on the road with that qwadzilla taking over your truck 

No shot lol! 

27 minutes ago, Marcus2000monster said:

No shot lol! 

We all got to learn how to drift at one point or other 

Well got to the box installed and steering is so much better! Money well spent. Just need to straighten my wheel and alighn. 

It's on my list but not yet

I noticed that my steering won’t return to center at all is this normal? @Mopar1973Man @Blue-Top Steering

Tires are they properly inflated? I know larger tires don't help the return process.

 

Any alignment issues? Pulling to one side? Tires not wearing even?

7 minutes ago, Mopar1973Man said:

Tires are they properly inflated? I know larger tires don't help the return process.

 

Any alignment issues? Pulling to one side? Tires not wearing even?

I do need to check alignment but it steers nearly perfect now. Tires wearing even. I did notice when I rotated my tires that I started to feel a slight vibration. 

2 hours ago, Marcus2000monster said:

I do need to check alignment but it steers nearly perfect now. Tires wearing even. I did notice when I rotated my tires that I started to feel a slight vibration. 

Are you still running the stock 2nd gen wheels?  I noticed when I had mine I would get a random vibration at higher speeds from one of them.  Rotate the tires and it was gone until I rotated them back.  I had them all rebalanced and everything was good.  I haven't had any issues since I got rid of them. 

4 minutes ago, Sycostang67 said:

Are you still running the stock 2nd gen wheels?  I noticed when I had mine I would get a random vibration at higher speeds from one of them.  Rotate the tires and it was gone until I rotated them back.  I had them all rebalanced and everything was good.  I haven't had any issues since I got rid of them. 

Check out my signature. 

Just now, Marcus2000monster said:

Check out my signature. 

I did read your sig before I posted and totally missed that part. 

I believe some of my slop has came back already. Will my warranty be voided if I mess with the adjuster on top? 

7 hours ago, Marcus2000monster said:

I believe some of my slop has came back already. Will my warranty be voided if I mess with the adjuster on top? 

 

I would say yes, it is probably marked with paint. Make sure where the slack is. Grab the steering wheel shaft at the box and turn it by hand, watching where the slack is. Do it with the engine off. Make sure there is no slack in the steering shaft couplers (u-joints)

3 hours ago, NIsaacs said:

 

I would say yes, it is probably marked with paint. Make sure where the slack is. Grab the steering wheel shaft at the box and turn it by hand, watching where the slack is. Do it with the engine off. Make sure there is no slack in the steering shaft couplers (u-joints)

We call that a dry park. Everything else has is tight. 

Have you called Blue Top to question them?

I wonder what happened? Mines good and tight!

2 hours ago, dripley said:

Have you called Blue Top to question them?

Not yet.

About to pull the trigger on a new steering box, pump, hoses! From the comments, blue top is the way to go I assume. Already have the borgson shaft so hopefully I'll have some super tight steering! Also going to re seal vacuum pump while I'm there. Best place for vacuum pump stuff? I'll just Google blue top and go to there main page? 

 

Edit, I went to blue tops site and didn't see any option for 2nd gen steering gears??

Edited April 23, 20196 yr by Stanley

3 minutes ago, Stanley said:

About to pull the trigger on a new steering box, pump, hoses! From the comments, blue top is the way to go I assume. Already have the borgson shaft so hopefully I'll have some super tight steering! Also going to re seal vacuum pump while I'm there. Best place for vacuum pump stuff? I'll just Google blue top and go to there main page? 

In the other thread Chevy box, I may try that route if it's built better, with bigger bearings etc.