Everything posted by hex0rz
-
The bear is moving in
If you can sell ice to an Eskimo, sky is the limit! mmmm, this is the from the rare silver-back bear! Bile give you much stamina! Make beavers scream! On a side note, I worked for an orient one summer and he found out I hunted bear. Thats when I found out they were worth something to them... Offered me $500 for it.. Little did I know... :banghead:
-
Please DO NOT move!
....yes? What are you alluding to?
-
The bear is moving in
Just pay for me to drive down. I'll rid you of yer bear problem... I've got my compound bow out this year for elk and deer, won't hurt to try it on a bear! As well, there is no season for a depredation take! The bear fat will make great rendered lard. Save the gallbladder too. IIRC, thats the part the orientals want from a bear, as they think there is something special about them...
-
1st Gear or 2nd?
Hey, as long as you don't lug the engine, why not?
-
Please DO NOT move!
http://www.infowars.com/obamacare-fines-to-be-seized-from-bank-accounts/ As we all hope, I hope this is not true! Better reeeally start re-examining things here...
-
The bear is moving in
https://www.youtube.com/watch?v=OyDpcUtVnzM :whistle:I've listened to people swear by steaks, burger, jerkey, etc. I have yet to run into one person that has properly prepared bear into such meats. Last time, I had bear jerky that tasted like someones armpit... :sick:I prefer to make all mine into sausage... A years worth of brats!
-
Who's Burning???
As the old adage goes, "firewood warms you thrice". ...wait, 3 times? Lets think about that one: 1. Gathering it 2. Unloading it 3. Splitting 4. Stacking 5. Gathering again 6. Burning it.
-
Alright, I have read and read about lift pumps..... what is the verdict?
Whaaat?!
-
Who's Burning???
I remember, just a couple weeks ago, it was warm out and sun was shining. The next day, it was like night and day and fall just came!...it must be here to stay. I think I became too accustomed to that Yakima weather...
-
The bear is moving in
Remember, its still bear season in ID. ...turn him into nothing but sausage!
-
Brake Caliper?
I forgot to mention, I did a brake fluid flush when I did the rear brakes. Which was after doing the fronts. If the rain stops and tomorrow clears up, I guess I know what I'm doing... :banghead:
-
Who's Burning???
:banghead: Temps. have been dropping down from 60's in the day to around high 40's to 50's. Went to Avery for a hunting trip last week and it darn near RAINED every day we were there!Was at 5k feet and could see mountain tops snow-capped at about 6k feet. Rain has followed us home and have not seen a day of sunshine since! Thats 9 days of constant wetness! I'm tired of it! Propane is running... Burning in my artificial fireplace.
-
Brake Caliper?
Alright, just recently got back from hunting and I did not notice anything until I got about an hour or so away from home. When I go to brake, the truck wants to pull hard to the right. I got to literally turn the wheel about a 1/4 turn to the left to keep straight.I'm wondering if maybe it is instead the left front caliper not grabbing?I've rebuilt the front calipers about 2 years ago, did new pads and rotors as well...
-
Obamacare is so screwed up
I know he was not a commie. I should have put that sentence in a paragraph, itself. I was trying to compare how he was like a pipe the piper when it came to the people. Obama is the same... You got a so-called smooth talker and get peoples emotions in the mix, watch out! Its like TNT...
-
Fire Academy
The hydraulic shears would!
-
Fire Academy
Yea.. and DO NOT cut the high voltage wires! ...orange, IIRC.
-
Fire Academy
When I went through ours, we got schooled on a good portion with the hybrids.. Hope you touched based on some of those...
-
Smoke switch
Hey, guilty as charged, here! I don't need a switch, just romp on the pedal when going slow with my edge and all them liberal bicyclists will remember to stay away from you... http://forum.mopar1973man.com/threads/8385-I-was-a-little-naughty?highlight=
-
Thread Sealant for Gauge Install
Permatex makes a good sealant. I use them on my fittings for the Fuel pressure gauge. Since I was having fuel leaks and was not allowing an accurate pressure reading. It works like a charm. Says not to use with diesel, but it has not dissolved on me yet and its been over a year.
-
Obamacare is so screwed up
You guys better start getting more comfortable with the idea of a 2nd American Revolution... :USflag:Brush up on your history of Adolf Hitler and how he swooned the Germans. Obama is the mouth piece helping the ignorant embrace the govt. benefits more and more. Before you know it, you have accepted communism without even seeing it.
-
Need a help with Raptor pump...
I have told myself from the day I found out and it was after the fact, that I will be getting a mechanical lift pump. Originally, they do not come with all the stuff I would like out of it, but now that I have an airdog lift pump, when it finally comes the day, I will go mechanical and have all the benefits from the airdog features, like the draw straw basket and filter block with 1/2" lines. So if I were you, look into the DTT Assassin, or the GDP Fuel Boss: http://www.dttdiesel.com/product-p/dttfp.htm http://www.glacierdieselpower.com/product.aspx?pf_id=FB-98502
-
Fire Academy
- 1994 Ford cabover W/Cummins
Can you handle a cab-over? My rear doesn't...- Obamacare is so screwed up
http://www.cbsnews.com/8301-250_162-57603877/house-passes-bill-funding-government-defunding-obamacare/ ^ Maybe a little light at the end of the tunnel?- edge and airdog deal, is it worth it?
Well, this is where some will agree and disagree. I personally would not mind having the attitude. But some say it is not worth it.The Attitude is going to come with your edge comp chip incorporated into it with a slew of other things like gauge readouts, etc. So you would not need any gauges. Just make sure that for whatever you want to monitor has the senders and harnesses, etc.Some will say to just KISS it and go with seperate gauges. As if one gauge goes, the others don't go with it. If the attitude malfunctions, you lose all of your monitoring. Best case scenario at that point is to turn off the power mods on it and anything easy until you get it fixed.You won't have a warranty with the Attitude and if something was wrong with it, you would have to send it in to get fixed. Longer wait time for them to get it, diagnose and fix then send back. That is, if it is fixable. I dunno how often one of them go out on a person, but I think EDGE is a quality company.The airdog is a good match for you. It also depends on what manufacture date it was too as some portions of Airdogs seem to have more problems than others. This will also be a problem for you as you would not have a warranty for it either. If its the airdog 2, chances are it would be a reliable one.A 4" exhaust will not be necessary if you plan on staying close to stock...Oh yea, if they are not older units and have not had too much wear on them, its a real good deal. An attitude complete, would be around $1100. Retail together your looking around $1700. - 1994 Ford cabover W/Cummins