2nd Generation Dodge Non-Powertrain

I am experiencing the same problem , but I notice my brakes "slapping" my foot every now and then when I first go to apply them, Do I have the same problem, a gear box? Or do you think it's the pump?Thanks in advance.

Hi, I have searched but can't seem to find anything definitive that relates. My brother has a 94 and he dropped battery cable and shorted it out under hood. (not sure why truck was running) Anyway of course it is now not charging. He has had alt tested and appears to be OK. He has bypassed the ECU with a regulator no difference. He has supposedly checked the Fusible link and its OK, I have been doing some reading and every once in awhile someone refers to crank sensor, what does this have to do with a non charge situation? He is going to bring truck to me so I thought I would pose for suggestions. I cant validate the alt test at all so I will check diodes to see where t…

Anyone have a source for them for a 99 truck? I can find 01 and up but none for 99. It's all coming apart for ball joints soon so now would be a good time to get some back on.

1996 Dodge Ram Sport headlight on the passenger side is bright and the headlight on the driver side is dim and makes no difference with high beams on, does that mean that the light bulb is burnt-out on the passenger side because I put a new bulb in where the dim light is on driver side and there was no change.

I'm about to pick my truck up from the shop... they reported a rusted & cracked front coil seat on the front axle. I can't say I'm surprised with all the rust underneath... still one more thing to get tended to. I haven't got the bill yet for finding & fixing the motor-quit-in-the-street problem... or the install of the AD150, big line & pickup. edit OK, I got the truck back. Cost an arm, a leg & a nut!! I had them show me the rusted out spring perch, so I could see exactly what they were looking at. Yup, it's rusted out. I'm not finding a listing for this welded on part. Anybody know where to buy this?

Hey everybody..95 ram 12 valve...I know this subject beat to death...have been looking around, search function little confusing..and not allowed to look at diagrams and pictures yet..My Abs/brake light on. Replaced brake light switch,replaced rear abs sensor..check wire from switch to wire harness in back, Cleaned all ground wire in engine bay. Question my fuse holder in engine compartment has place for abs fuse,but only one spade other side missing spade? Was it broke off? or do i not need fuse? When i do start it the brake light seems to try and go off..but no change in abs light..Does my emergency brake have a switch? Have not looked under steering wheel yet but going …

I know you all know I've got four 100w bulbs on the bottom of both Dodge Ram trucks I have. Well over at RamForum I've seen a few Trucks with hidden fog/driving lights behind the grill. So I went to building the poor mans version from a piece of re-bar and flat stock. So now here is the stealth lights...

So, for those that don't know, my truck is a hodgepodge of wiring, parts, and different model years-which while it runs, it does cause some issues. One of them that I've temporarily found a workaround for, is the AC. Getting it to run through the PCM and actual harness is out of the question-I have no clue how everything was spliced together, and i don't have the time or extra vehicle to use to tear the wiring apart and trace everything down right now. I have been able to get the compressor to activate, by running a relay off the battery, to a toggle switch inside the cab-but, if it's not retarded hot outside, I do have to shut it off periodically, as the lines will fr…

Today I went to borrow my friends car hauler to rescue my broken down commuter car and only the brake lights and turn signals would work on the trailer. I tried my second 7 pin connector for the 5th wheel in the box and it was the same thing, so I figured the problem is upstream of the 7pin connectors. Did a bit of reading and found the big square 40a fuse in the fuse box in the engine bay and sure enough she was toast. Stole the 40a from the fuel heater until the parts store opens in the morning and everything was working again. I'm looking for some suggestions why this could have happened? I My guess is that it was one of the following things: 1) 19…

Ok, spent the last few days digging down to try and repair the deep water Horizon... (lifter gallery gasket) As I was taking off the the VP, whoever was there before did not reinstall the rear bracket. Does anyone have an extra one laying around? I will buy it if you do. Thanks! Hag

This is my new project. I've got the tig, the cutting tools, sander, etc... I found the basic steel design photos but was wondering if anybody had any input. I was also thinking if I made one I might as well make two. Whats a fair price for a good aluminum bumper?

Ok so if I am going to tear into the suspension on my 350k mile truck, I want to improve it as much as possible.. In my old OBS ford that mean at least doing an RSk, etc.... Is there anything I can do for this truck for tremendous improvement? It wouldn't bother me if it made it sit a little lower (modern height 4x4 dually trucks sit pretty low now) Thoughts?

Hi, I'm new to this forum. I have bought a 98.5 4x4 Cummins and the horn does not work when i press from the steering wheel but works with the EVS 2 factory alarm. Do you think its the clock spring? if so how big is the job to replace? Thanks...:banghead:

My truck has fender flares to cover the wider and different offset rims/tyres, end of last year I repaired the bed sides both sides, here in the UK it would be rear wheel arches, rear fenders maybe for you guys, not quite finished as weather stopped play, I've just sprayed in paint I had lying around to cover for the winter. Got to thinking If the rears were rotten then the front fenders under the flares might be the same, sure enough right hand side lower area on the fender is past it's best, no problem for our MOT as the flare covers it, looked on Rock and £73 or maybe $50 to 60 ish for the right hand front fender. Not too bad Put in my email address a…

I've had a leak in this area for awhile now, and today I broke down to rebuild the booster. In the process of removal of things, I found my leak is only between the master and the booster. Now for the crap part, I can not find the oring, rubber seal or whatever it maybe anywhere. Local, auto zone doesn't have oring this big. Anyone have a part number or a knowing of where I can get the ring?

Truck question/issue: As most of you know, I have a 99 Ram, 2500, 2x4, Cummins, Auto. it is up @ 230,000 miles now so Ive replaced just about every consumable on it a couple of times now. I have noticed the last year or so, it bounces down the freeway now. the faster I go the worse it gets. it only happens on Concrete (not on blacktop) & not all concrete, just some. This really seems like this is a shock problem. However I have replaced the shocks (that were not that old) with new ones & the problem is still there. I used to have Bilsteins on there & the previous 2 sets were also Bilsteins. being as its a 2x4 I dont have a lot o…

New Issue: After I replaced the multiswitch on the console everything was fine. My buddy was behind me a few days later and said my brake lights don't illuminate when I hit the pedal. I checked all my fuses and my brake switch twice. They will light up the first time I hit the pedal then they don't light up anymore. Anyone have any ideas? After I hit the brake pedal once I don't get anything. I'm guessing all of these issues are tied together in some way. Resolved: My 3rd brake light switch fixed the issue. The first two must have been bad. I finally got one from the dealership(it was actually cheaper than O'Reiley's) and its fixed. I hook…

Does anyone know how to have my fog lights stay on with my high beams.

Seems like I got a few problems dropped on me all at once. This time I found that the A/C is leaking back into the cab. I noticed a wet brown colored spot next to the passenger seat and began to investigate. After looking, it seems that the vent tube(?) inside the engine bay is leaking back into the cab. I felt what seemed like a foam oring/seal around the tube in the engine bay and it was soaked. After I pulled the carpet up in the cab I could see that water was coming from the same area inside. Right now I soaked up as much as I could with towels and went and got some damp rid. I figured I would let it dry out for a few days and then try and silicone the tube in …

How much distance should there be between the bump stop and the axle? I only have about 3 - 3.5 inches. 01 dodge 2500 4wd