@MUDDY had a project for me at his place. I happen to spot a set of wheels that would get rid of my crappy aluminum wheels that one is way out of center or bent some how. Sad to say, my tires are beyond saving the damage is done to them. I did the dismount and remount myself and spun balanced them to true ZERO on all four tires. At highway speeds you can feel the vibration from the wheels. No, It's not driveline I just replace all u-joints on both front and rear driveshafts. 

 

 

Nice match to my 1996 Dodge Ram 1500 no all I need is a set of center caps. At least the tires are now tucked back under the fenders again.

Deja Vu.

This should be the only one. I was fighting a copy and paste glitch that I figured out later on. Sorry for the multiple copies...

copy and paste this you big potato head,  . 

 

The chicken man laughs in your face.

Edited April 8, 20178 yr by dripley

  On 4/8/2017 at 2:44 AM, dripley said:

The chicken man laughs in your face.

Keep it up you big cluck and this is where you're headed.

 

If you're interested I have the stock 16 inch alloy wheels with the hubcaps and a set of highway Michelins.

 

Edit: Looked up New Meadows and you're about 5 1/2 hours South of me, not sure if that would be worth it.

Edited April 8, 20178 yr by NorthernDodge

It's so nice to go back to the correct offset wheels. I just did the same thing to my 01. No more mud sling and the steering feels a lot better. I had a set of second gen aluminum wheels sitting around for 9 yrs. they only have 30,000 0n them so not worried about the cracks, they're still new.

 

BTW ,how do I edit my signature? I want' to list my two other trucks two.

Edited April 8, 20178 yr by JAG1

Just need the center caps.

  On 4/8/2017 at 3:15 AM, IBMobile said:

Keep it up you big cluck and this is where you're headed.

 

Post of the week right there.  


@jag1 just click in the upper right and go to account settings

  On 4/8/2017 at 11:28 AM, Mopar1973Man said:

Just need the center caps.

Hubby's Hub Caps in Portland, Oregon Has them says they're getting hard to get for the first gens and want $45 bucks a piece. Yet she has almost a whole 5 gallon bucket full, she won't reduce her price, so I bought the knock offs from her for less.

 

Just looking at and handling center caps from different gen Dodges, I got to say the second gen caps feel like good quality and heavier compared to the rest.

Edited April 17, 20178 yr by JAG1

  On 4/8/2017 at 1:57 PM, Me78569 said:

  On 4/8/2017 at 3:15 AM, IBMobile said:

 

Post of the week right there.

That is a great one, no doubt. I have been cooked.

Edited April 8, 20178 yr by dripley

  On 4/7/2017 at 8:53 PM, Mopar1973Man said:

....... my tires are beyond saving the damage is done to them. I did the dismount and remount myself and spun balanced them to true ZERO on all four tires. At highway speeds you can feel the vibration from the wheels. No, It's not driveline I just replace all u-joints on both front and rear driveshafts. 

Have you checked for runout with a dial indicator when they are on the truck ?

My 1st Gen would vibrate like yours. On a long sweeper curve, does the vibration phase in .... then gradually phase out. In and out, in and out?

 

I can check it for runout. I've got a dial indicator on the shelf. 

@trreed has some center caps.

 

BTW none of your pictures at the top are working for me????

I sure do.  I have 5 of them that are cluttering up the shop area...

  On 4/13/2017 at 1:57 AM, trreed said:

I sure do.  I have 5 of them that are cluttering up the shop area...

Send me a PM...

Good, someone wants them!  Otherwise they'd be going on the girlfriend's horse trailer.  Now that'd be a sight

Lost one on the trail or job site replacement rattled so I gave up on hub caps... I have some decent oem caps around here I think 2 or 3 

  On 4/8/2017 at 2:12 PM, JAG1 said:

Hubby's Hub Caps in Portland, Oregon Has them says they're getting hard to get for the first gens and want $45 bucks a piece. Yet she has almost a whole 5 gallon bucket full, she won't reduce her price, so I bought the knock offs from her for less.

 

Just looking at and handling center caps from different gen Dodges, I got to say the second gen caps feel like good quality and heavier compared to the rest.

Do you think Hubby's has 16", 2nd gen simulators/wheel covers for dually's? I'm missing one on mine and it's driving me crazy.

Do they have a website?

  On 4/19/2017 at 12:23 AM, leon said:

Do you think Hubby's has 16", 2nd gen simulators/wheel covers for dually's? I'm missing one on mine and it's driving me crazy.

Do they have a website?

I would give them a call at 503 777-1038. They are actually called Hub Cap World now.

@MUDDY said he has the hub caps for these wheels I just now go to get them next time I hook up with him...