Sycostang67

I have the 4th gen style from 1AAUTO as well, pretty smooth on the road, no complaints from me. I've had them over a year with no issues. I really prefer the straighter lines of the 4th gen mirrors over the 2nd gen as well.

I found a set of the 3rd gen 5 spokes on CL for $180, had to get some more center caps from another CL person though so I have a few spares. Got a set of Cooper Discoverer STT Pro's, 295/70R17. They are super quiet on the road, but unfortunately they rub my nerf bars a bit when making tight turns for parking. Thankfully it isn't an issue just driving around.

I took my truck to the dealer to have the computer flashed and the idle software turned on. My switch didn't work so I went back and had them do it again. It turns out they had done everything right the first time except turn the idle option on.

New paint makes the truck almost feel new again, what color you going with?

I currently have 5 Auxbeam LED lights on my truck, 2 spots under the rear bumper, 2 spots on my headache rack and a 20" bar on the grill guard. I installed all of them last summer, they all still work great, no yellowing, no moisture accumulation and they definitely got wet this winter. I paid $40 for all 4 spots and $50 for the bar, all on Amazon. I plan on getting a 30" bar to replace the 20" so it completely fills the gap on my grill guard.

I tried a set of LED bulbs and never even got to install them. They wouldn't work at all when I plugged them in to the harness, moved the pins around and could only get high beams to work. I called tech support and was told that due to the stupid way our trucks are wired, the LED's wouldn't work. They sent me some 5k HID's with a relay kit in exchange. They work a lot better than the silverstar ZXE bulbs I was using. I adjusted my headlights down a bit as well as I see people say they are too bright in a stock housing. I got in my friends car and drove at my truck and they aren't near as bright as these new car HIDs, plus it's been two weeks now and nobody has flashed me either.

I take mine off to dust it out once in a while. I little clear plastic polish or even chrome polish will help remove any light scratches you may have as well.

My truck has one of the hard plastic covers. The dealership installed it the day before I got it. It's not bad, the casual observer probably couldn't tell it's a cover but the auto or detail oriented people like us would notice. They didn't do the best job installing it though so it could have turned out better if someone who cared was installing it. I plan on doing a full replacement dash this year.

I have an SGII which came in handy yesterday. I installed my BD stealth cover and had to turn the ignition on with the APPS disconnected to test the connection. That caused me to get a P0122 code which I was able to read and delete.

I've had 5 windshields replaced at Safelite and never had an issue. They come with a warranty against leaks and defects as well. They even did a great job on my 67 mustang and my friends 79 Trans Am.

Sorry, I'm still a large child, no mufflers on my rides. My neighbor is deaf if that helps...and no he's not deaf because of me.

My friend has a 6.0 and says his truck heats up really quick. My old 7.3 IDI didn't warm up terribly quick, but was quicker than my cummins which seems odd since I think my IDI had 3 more gallons of coolant to heat up. The IDI did have a cold idle though so that may have been the difference. Now my cummins has the cold/3cyl idle just in time for the weather to warm up. At least I will be more comfortable next year.

I'm on my second reman box, technically 3rd since the PO had replaced it before. I replaced that one because it was leaking, but the new one had 1/2 turn of play. The one I have now causes the truck to pull to the right and still has about 1/4 turn of play. Everything else was replaced and brace was added before the box, had it aligned twice, had tires rotated. Maybe 3rd time is the charm?

I went back to the dealer this morning to have the reflash checked out. I guess the first tech did everything except actually turn the high idle function on. After 20 minutes I was good to go, tried the switch in the lot and it's working great now.

That's what mine does as well. I need to get a new timer for my plug, it quit working the first month.

I put them in the garage, but here's one..

Those look good, not too euro like. I did the relay upgrade on my 67 mustang, I was told to go to broncograveyard and order their harness as it was the same setup used for the mustang, just cheaper for some reason. The DAP relay seems a bit excessive at $150 though, my mustang kit was only $50. I know there's a few more parts being a quad light setup, but it still doesn't add up.

I have one rust spot under my bed I need to take care off. What really scares me though is what ever they put on the roads this winter is dripping off my truck and eating my driveway. The top layer along both sides of where my truck sits is starting to flake off.

Gonna make a 747 blush with all those gauges.

I tried before but it wasn't working, got some pics up now. I learned not to leave the switch in MPG mode while trying to start it cold yesterday.

Thanks again for checking that out, I have an appointment at the dealer on the 16th to see what they may have done.

I haven't messed with the APPS since I got the truck, should I maybe do a reset? If you are near by, I would certainly appreciate you taking a look. I could meet you somewhere so you don't have to come all the way out to Kuna. I'm free tomorrow, but if you don't see this in time we could do it next Thursday as well.

I just got done installing my high idle switch. I went to try it out, but nothing happened, I waited for about 10 minutes on each setting as I know it's not an instant thing. I don't think it is the switch as I have a scan gauge and it shows the IAT and ECT values change with each twist of the knob and the TPS voltage was also reading 0. I took the truck in 2 weeks ago to have the TSB for the high idle unlocked, they said to bring it back if it didn't work, but is there anything else I should check before I deal with the dealership again?

That sucks, good to know ahead of time though so I don't freak out when it arrives. Thanks for the heads up.