2nd Generation Dodge Non-Powertrain

Before hot weather arrives I would like to be able to diagnose my A/C system on my 2001.. When on only puts out ambient outside air temperature no cooler air at all. How to check/ troubleshoot.

Hey guys, about to put in my blue-top box I got and wanted to make sure I was thinking this through correctly. The following sound ok? 1. To flush out the old lines I plan on having the old box off, and just running fresh power steering fluid through the reservoir for a 1/2-full quart. 2. Once everything back together I plan on putting fluid in reservoir until 3/4 full, starting truck and first, pumping brakes, then checking fluid, add as neccessary, then turning wheels full lock one way, checking fluid, full lock the other way, then checking fluid. That sound about right for doing this?

I can't help let y'all know that my truck is almost in primer. Should be getting base/cleared mid April sometime. Won't be long!

Hey all, I have a 2001 24v and a few months ago i started noticing the throttle acting weird / revving up and letting off on its own a tiny bit when cruising around 55mph, I would then put it on cruise control and wouldn't notice it. Then the other day I noticed after driving on the highway/ with cruise control I'd get off to get fuel and the truck would be idling high around 1k until I shut it off and re start then it would be fine. Finally on the trip home I was running 70mph with cruise control on and the cruise control cut off and the throttle went unresponsive and threw a check engine light. I did the key thing to get the codes on the dash and got p0500,p1693,p0121,p…

@MUDDY had a project for me at his place. I happen to spot a set of wheels that would get rid of my crappy aluminum wheels that one is way out of center or bent some how. Sad to say, my tires are beyond saving the damage is done to them. I did the dismount and remount myself and spun balanced them to true ZERO on all four tires. At highway speeds you can feel the vibration from the wheels. No, It's not driveline I just replace all u-joints on both front and rear driveshafts. Nice match to my 1996 Dodge Ram 1500 no all I need is a set of center caps. At least the tires are now tucked back under the fenders again.

I'm stuck in Boise. I just lost a wheel bearing. Cell 208 315 1470.

Is there any reason why these would not bolt up to my 1995 2500 12v 4x4? I mean the set of A/T tires alone costs $1000 these days, the newer wheels would be sharp in my opinion. https://gainesville.craigslist.org/wto/6086617428.html

How do you install a 2 inch leveling kit on a 2001 dodge ram 3500 2wd

So I degreased the motor, and my mechanic friend stole my truck truck while I was out of town and replaced the hemorrageing tappet cover gasket. He pointed out that I have a crack in my exhaust manifold, and showed it to me. That bumps up that repair to the top of the list. So I priced one at Orieley's and it's not too bad ($250ish). Are exhaust manifolds all the same, or should I stay away from the chain store part? Any thing to watch out for, other than cracking bolts, etc?

So just got my mirrors. And to my surprise, they aren't even close. What did you guys do to make em work?

A Robin is obsessed with looking at himself in the black shinny paint, mirrors and ss rocker panels on my newer truck. He won't stop poopen on the bed rails when he sees himself in the mirrors. He even attacks the reflection of himself. And since there is another good perch next to my truck on my wifes car door handles, he leaves a good one there almost ea. morning. My CO2 BB gun leaks when I go to put in another Co2 cartridge. Does anyone know how to stop that? Maybe a small 'O'ring or something? Funny, it's only a few years old and won't charge up at all. Thanks in advance I have big guns but don't need a hole that big in truck if a m…

Any one know a simple place to hook up the gauge light. I mounted it down near the floor in front of the 4wd shift lever for protection from feets. It is a good spot cause I can see it without looking thru the steering wheel etc. Been working so hard lately, not much rest, I need simple if you know a spot down there.

guys I have a 2001 ram 2500 4x4 cummins automatic my rear seal is leaking anyone know a part number or what seal

So I'm out on a road trip and last night when I turned my lights on the brights never came on, the bright is illuminated on the dash but no headlights, I have just recently upgraded to the dual sport headlight from DAP, and before I left I also installed the relay wire harness kit from DAP, and they were all working fine for the last week or so. I still got the dim side but no brights. I checked fuses and relays and are still good, I am wondering if it's in the mfs switch on column or light switch on dash, Any ideas what to check, I'm out on a road trip so kind of limited to what I can do.

Hey gents. So after doing my front brakes, now I have a leak from the LF axle. ? If it's not one thing, it's another. Having said that, how do I change out he seal? Do I REALLY have to pull the front diff cover, along with the ring and pinion? Seems ridiculous. And I don't want to mess with shimming and lashes. Any tips? Thanks

Seems that over the last year or so my steering wheel has developed a popping/clicking inside the cab. I've read a few posts in the past where people said it could be the clock spring or the bushing but both seem to be hit and miss fixes. Just curious if there's anyone out there who's actually fixed the issue and what worked for you. Doeant matter which way you turn the wheel the problem still exists. The noise is definitely from the column and it sounds more like a bearing when it's gone out. Any advice is appreciated.

New issue here turn signals just went out. Flashers work fine. No trailer hooked up or anything. For as bit the turn signals would come on for about 2 clicks then go out both left and right. Now I get nothing. I looked under the hood and on the side panel for a signal relay but did not see one. Anyone have any advice where to go from here?

I have 4 wheel disc. Parking brake pedal is getting close to the floor. Which way do I turn the adjusters to tighten the parking brake shoes?

Shouldn't dodge rear brake adjustment starwheels be right and left, in other words one has right hand thread and one has left hand thread? Is it possible to reverse them side to side so brakes don't auto adjust? I haven't had these apart yet, but it seems to me that I am turning starwheels backwards to adjust brakes out!

My tires need replaced before winter makes its head. What's the popular suggestion for tires these days? I'm half pave half off road. It snows a boat load in the winter. I'd like something with a high load rating, but also aggressive enough to keep my traction and give me longevity. While i realize I'm asking for the perfect tire, there has to be something close! I'm thinking about going with oem size tires also. But I've also wondered about different wheels and sizes. So what's everyone say...