2nd Generation Dodge 24 Valve Powertrain

On the way home today truck lost all power and I had no throttle response. Then worked enough for me to get home before reving up and down until I shut it off

So to start off be patient with me please, I’m new to diesels, and working on my own stuff in general. I’m young and don’t know a whole lot about anything. But a few months back I had to replace the vp44 on my 2001 5.9 Cummins. Me and my dad had to work on it at separate times since he was working nights and I was working days. Well we eventually got it off and the new one on. And when we got what we thought was everything plugged back in and ready to go we went to try it and the two wires that connect to the two studs on the same side of the intake horn for the grid heater we’re left undone and we’re laying against something. So when we started it I went to the front and…

Can the cam position sensor be tested with a DMM for the correct resistance? If so, what should the value be? This is on an 01 2500 auto. Trying to track down what's causing a P1488 code among others. The trouble-shooting procedure tells us to replace the cam position sensor but we've done that a couple times. Any help would be appreciated. Thanks.

Hey guys - 5.9 cummins project getting a Jeep body swap on it. first post here hoping for some help! Since buying the truck in March I’ve recently replaced the cylinder head with a tested/inspected reman and threw in ARP headstuds and a new head gasket. After installing head I have no start. truck was running and driving perfect before and since the head it’s a no go. fass lift pump and thoroughbred diesel VP44 were each about a year old before I bought the truck. Lift pump is working as it should but I have a feeling injection pump has something wonky going on. When I bleed the rails, fuel shoots intermittently with a ton of bubbles. I’m getting a ton of air in the…

Recently bought a 7 owner 2001 2500 for a overland camper project. It has a lift but I have no idea how big. From the center of the hubs to the bottom of the fender measures 26” front 28” rear (I think this is the scientific way to measure) Any idea what size life she has? Appreciate it!

Does synthetic fluid last longer/result in less wear extending life of a 47re auto Trans with oversize cooler and valve body/tc upgrades. What brand is good

Hi guys, I'm having a hard starting issue with my 99 24v manual. I noticed today that when i first started it it cranked for a few extra revolutions, maybe 5 seconds. I thought the fuel had probably leaked off since its been sitting for about a week. Went to the dentist left it set for about an hour, same issue. Had the same issue at work after setting for 4 hours. Tonight when I got home I immediately tried restarting the truck. It did the same thing, cranked for about 5-8 seconds then started. Here are my thoughts: 1). It seems to be cranking slower than normal. This leads me to believe that it could be bad batteries/starter not spinning the engine fas…

Hey folks, I'll be going thru some of the various wiring problems im having with my '00 2500 cummins here this weekend, and I want to get a head start on diagnosis / get my mind right on it. First problem, I've got the p0113 code and replaced my iat sensor which unfortunately did not solve the problem. on my scan tool, the temperature reads -40 degrees. I have NO KNOWN symtoms, even though I do have the code. This points to it being a problem in the wiring and not with the actual temps. There's an aftermarket (afe) air intake on the truck that the previous owner installed Second problem, my engine coolant temp sensor is not reading, pi…

Fuel boss mechanical fuel pump . About 30k miles on it. Lately i'm noticing random odd fuel pressure fluctuations, mostly pressure is occasionally going higher than expected, like 25+ psi. The strange thing about it is it seems to be happening when it shouldn't be like when I'm towing and revving at near wide open throttle about 2500 rpm or above etc. I would think the pressure should be a little lower when the engine is demanding more fuel. Other than that I can't find any rhyme or reason why this is occurring. Any suggestions? Is this anything to worry about? Thanks!

I have been restoring a flood truck since last December, the water line was a couple inches into the cab. The vehicle runs and drives, I have since gotten a salvage restored title and it is my daily driver. Through all the many fixes on my vehicle I have had some creeping intermittent boost drop/dead pedal/bucking surging mostly when moving from lower speeds. When I am heavy on the accelerator it seems to be much less apparent. I have put at least 200 hours into the truck this year and have had many components taken out and reattached so anything is fair game when it comes to explaining the issues I am dealing with. The main question I ha…

Well onto the next item to fix...what appears to be a head gasket problem . I'm extremely certain that my issue is in fact a bad H.G. but I took a short video so you all can see what I see. The video was taken right after shutdown on a hot engine. What caught my attention, initially, was the upper radiator hose becoming quite firm upon squeezing it at operating temperature. For what it's worth, I had gotten some air into the system (changed the thermostat and radiator cap/went on a short drive up to operating temperature). I cant imagine these bubbles have anything to do with air being bled out on its' own? I did park the truck nose up and burped the system the best…

Like title says, I have about 4-5 psi at idle and 0 at WOT. I used a gauge that I connected at the VP44. Does this mean new lift pump? Injection pump?

Ok guys im building my nv4500 and the updated mainshaft uses the split 3 piece washer on the fifth gear but when i put the nut on the outer ring of the washer stays loose is this normal or is there a spacific nut i need

Hello I have a 2001 that is cutting power at random. When it looses power it is off and on real quick. The rpms tps and speed stay constant. The only way I’ve got it to stop is to unplug the speed sensor on the rear end and since I’ve done that hasn’t happened since. I replaced that sensor. When it’s plugged in the problem comes back. I have a IQuad V2. On the I quad the speed is all over the place the factory speed seems to read correctly. When the truck cuts out the IQuad speed reads 140+ when in reality I’m going 30 mph according to the dash. I’ve seen it jump up to over 70 when the truck is idling in 1st gear. I’ve also completely disconnected the IQuad and the truck …

I’m new to the forums and would appreciate any help. Just purchased a 2001 Ram 2500. It has a mild case of previous owner syndrome that I’m trying to correct. Most of the wiring issues have been pretty straightforward but there’s one in the engine bay that I need some advise on. It appears that the Org\Blk leaving the ECM has been tied directly to ground, effectively eliminating intake air heater relay 2. Anyone venture a guess on why someone would do this? here’s a pic of the wire. https://imgur.com/BtAmNmw

Hello everyone I have a question that hopefully you all know the answer to. I recently got my trans rebuilt by a shop with a full manual valve body extra clutches and a upgraded front band apply lever. It also got a new TC. After that it made a trip 800 miles pulling a 78 f150 and all seemed fine (I know it was stupid on my part to do that). Long story short I got back home and stupid me stalled it in 1st gear TC locked. I dident think anything of it at the time but after that it felt like whenever the TC was locked no load and driving it would rapidly engage and disengage. It had enough of it about 100 miles later and while just driving in normal conditions (not beating …

Ok looking for some advice. Ok, so I bought a 99 dodge several months ago. The engine has been swapped out for an 02 engine and computer. The internal tone wheel had been retrofitted to the front of the balancer. For several months the truck had a p1690 code. I did all the checks on this page and everything checked out fine. I finally got it to go away by rotating the tone wheel 180 degrees on the balancer and the code is no more. Worked good for about an hour, than I got a code for p0216 accompanied by the dead pedal. Truck has always had a lopey inconsistent miss at idle. Even after the p1690 code was fixed. I can Ho…

2002 24V w/Auto Trans. All Stock. The past 2 weeks have been riddled with an intermittent Check Engine Light, Erratic shifting and a Voltage gauge going from just over 14V down to nothing, triggering a Check Gauges warning light, then within seconds the gauge climbs to 12-13V and the Check Gauges light goes out. The intermittently flashing CEL usually coincides with erratic shifting and hunting of the lockup converter or what feels like clutch/band slippage in auto tranny. Started with checking the batteries (Good), checked the Field wires from PCM to Alernator and the PCM was not sending signal (Dark Blue wire). Continuity test of the dark blue and the green wir…

1999 ram 3500 24v auto low miles 4x4 long bed ext cab has issues shift out of foray into second I can rev up the truck all the way but struggled to shift into 2nd truck also has very low acceleration turbo spools but almost seems like there’s no boost no big leaks or blockages need help

Anyone ever used or heard of these? Was looking for a cummins 180 Thermostat down here in Vegas for creeping around slow in the desert. Ebay link