JAG1

MoparMan..... he goes for those blue hair ladies It all started when began smokin that funny tobacco.

Take the cord and wiggle it up and down. Like I said the lock works its way off and the cord falls out. One brand takes one time going up and down motion and the other bootleg brand takes three up and down motions, just like road bumps, and falls out. Like said before I tried this on brand new female connectors that I purchased.

fuel module screens clogged or sucking thru old in tank lift pump? Watch that inlet screen sometimes placed inside the inlet side of the aftermarket Raptors. Don't know about other brands, but tends to get clogged. I just pulled mine out with needle pliers. since I have pre filters.

I tried to tow my camper off the jacks with the cord. I cracked the the 7 pin female connector, but there was enough left to get me home with lites, about 700 miles. That Pollack connector is a real good one BTW. under the cap is a rubber gasket to seal off when closed everything built better than the two others I bought. Did gas go everywhere when nozzle broke off?

It dropped your cord and it's been fine for you?? I do not understand Dave

I found two china made off brand 7 pin female connectors won't hold the cord, readily falls out creating the dangerous chance of being rear ended. One is sold at Oreilly's Auto Parts and the other was sold at a local farm store near me. Beware of any brand not well known....... as I tested these two China made brands, I found the cord would fall out after simulating two bumps in the road, just two wiggles up and down and the lock lets go letting the cord fall out. They can kill you my friends. I finally went into Portland, which earlier I tried to avoid because of the many recent shootings, to a very good quality trailer supply and found both Bargman and Pollack to be good female connectors. The Pollack is the very best and locked the best. Just a heads up to all my friends on this Forum.

I will do that, give me a day or so

My new creeper is due to show up tonight before 9 tonight. I'm excited about mounting two metal plates above the shoulder area to hold a fully adjustable magnetic light on either side. It is 47 inches long and wider than most. Supposed to be pretty comfy.

he drives so slow nothin' ever wears out. The whole town won't go anywhere when they see him out and about squeakin around town.

I agree with both you guys because I know so well how much andhow often I can be wrong. I am also letting you know how I feel that actually happened there., which as I say again might be wrong. Thank you for your perspectives as well.. Makes for a better cup of coffee.

Yep afraid they would be found out who they really are.

Thanks Nick, in my way of seeing things I like to simplify to help understand something like this. It is only their actions and facial expressions that give me the impression they are not real Tumpers. One reason is it so hard to see why trump supporters would ever do something like this. I'm not convinced they aren't antifa or some other small group trying to destroy the Trump voters image. Especially since most all anti Trump groups have caused enough upset that I think they indeed have a tarnished reputation with many voters on both sides of the isle. It is difficult for me to understand how they can say..... Oh let the protestors express their 1st amendment rights, hardly enough charges were ever brought against their destruction and violence, yet the same time Parlor getting cancelled and conservatives being shut out of social media.

The only proof I have is that every Trump supporter has been a decent, honorable, hard working individual and when you watch the video of those radicals the way in which they act, the expressions on their faces, you can tell they are proud to be tarnishing the Trump people who for the most part have not caused much trouble nor damage throughout the country as other groups have. These people that entered the capitol are that, of an evil nature if you watch closely. I an sorry to say this, but I think the FBI can no longer be trusted from the things I have heard.

I'm not makin' this up Mike... I saw a jacked dually yesterday with wheels so wide they stuck out at least 8 inches past the fender, front and back mind you, he sped by only so he could tailgate a small car at high speed with the rest of the tailgaters. I was amazed at the amount of aggression.

The latest trend, seen several running down the highway, is wheels and tires so deep and wide sticking out the sides of the truck. There must be 6 to 8 inches out past the fenders without any mud flaps. They look like they rolling on toilet paper rolls. It's very weird...... it seems one guy started it and then others have to copy. Got to be hard on the wheel bearings. To add to it they are driving extreme aggressive like they idiots or something.

Those people that got inside the Capitol are intifa who made themselves look like Trump supporters. There is a major tidal of deception and crookery going on in our world today and the Dems just want to legislate a certain division by destroying our conservative values. They are opening the doors to America that will be given away,sold very cheaply, eventually fully consumed, overtaxed in its systems and programs , schools, roads, parks and National Parks worn down, so crowded, left broken. Garbage as a sign of the times. Crime and scammers will be everywhere. Just like the way they stole the election, so much evidence to support that happened yet the courts refuse to look into it properly. Something clearly wrong with these judgemental and contentious people. I am so sick of their politics, It's not politics It is a complete sabotage of America. If Biden was really the good guy why can't they maintain a balanced cabinet of Dems and Republicans. Wouldn't be something if they gave just an inkling of trying to unite the American people? I'm sick of their immature ways and their garbage they leave behind.

So do we have to be careful what we post on Mopar1973Man?

Yep I see things getting tighter and tighter

Quit eatin' that popcorn, you'll get big belly won't be able to work on trucks. You mean the Demonrats? oops think I spelled that wrong What do some of you think we will see in the next 4 years? I think it going to get really screwy, more and more exploitation of the working class, tighter living standards, more lawlessness and some real convoluted legislation. taking away from those who work hard to make good. Furthering communistic values and the giving away of America. Dissolution of America in general.

Lets see..... I need to look that up, it's been college years since I've heard about it.

What changes do all of you see coming? I'm annoyed so much by all the baloney, becomes repulsive. Want to get cable TV shut off, but then lose internet is the problem.

Lol.... and I suppose you want to go back to when Second Gens were new and the biggest problem in the country was fuel prices. W-T's Wire Harness Mods??

Any truck getting a new makeover is an accepted hijack on a thread. Good Vid on the AC noise playing havoc and people throwing parts in an attempt to fix it. Testing at the battery is not the way to test because the battery absorbs the AC. That is why W-T has us run the B+ charge cable to the battery first instead of the numb nuts factory idea to the PDC. BTW, everyone W-T would like us to stop calling it ''W-T's grounding mods''. This not is not an accurate title esp, since a big part of it involves getting the charge wire out of the wire harness and run to the battery. Can anyone think of a more accurate name for His fantastic wire harness changes?

Now it's in for a whole new makeover, getting all body damage fixed and repainted with Emeron, right?

Well, Soo What! You need points off for makin' me feel bad then.