Everything posted by Royal Squire
-
R and R Engine Dampener,
Don’t use your hand for a hammer!! You’ll regret it when you get older
-
2nd gen from Texas gulf coast
I’m not the guy to give advice on posting photos but someone else will probably chime in eventually.
-
2nd gen from Texas gulf coast
Welcome. Sounds like a great project. Got any photos?
-
Powder Coating Wheels
Maybe $400 isn’t too bad for all that
-
Powder Coating Wheels
Is that both sides of all 6 wheels?
-
Preferred vendor for diesel parts...
I ordered a set of rv275 injectors from dap, and after I installed them, the truck barely ran. I called dap and they promptly sent me another set with a return label for the faulty set. I thought that was good service. Just my $.02
-
N5600- Fuller 8406 swap
The ranch my Dad worked at when I was growing up had KB2, KB5, KB6, and KB7 trucks. They were all gas powered. Check out those mirrors! The trucks we had only had a mirror on the driver side. Can’t see much out of those little round mirrors when trying to back up to a cattle loading chute.
-
Well its been fun New Mexico....
Good to hear your dad is getting better after such a long illness, sounds like time to move.
-
Schrader Valve FP Test Port
Check with DAP
-
Can you do this?
I too use a funnel and often make a mess anyway
-
Fuel Tank Module Check Valve
I would talk to Eric @ Vulcan. My guess is he can help you relocate that pump with the proper wiring harness/relay, fuel line, pickup, etc.
-
Dash bessel removal
It separate of the bezel just like the later models
-
New steering gear
You can probably find a video if do a search
-
N5600- Fuller 8406 swap
What’s the transmission out of?
-
Everyone post a picture of your truck!
Absolutely others are interested. You should do a separate article. How many miles!!?
-
47re trans cooler line at the heat exchanger leaking
Looks like you’re ready for a spoonful
-
ECM gone. What about VP
Thank you. That makes sense.
-
ECM gone. What about VP
Any idea why my scanner didn’t show any codes when I had it hooked up?
-
Morimoto M Led projector retrofit.
How do the lights on the 2018 compare to previous years?
-
ECM gone. What about VP
I just had a belly hernia repaired and am pretty sore so may not be doing much for a while. I guess will have plenty of time to read.
-
ECM gone. What about VP
My son took truck to town and had trouble getting back. Scanner shows no codes. Key codes are: P0123 P1694 P1693 P1687
-
ECM gone. What about VP
Certainly don’t want to spend money unnecessarily
-
ECM gone. What about VP
I disconnected lift pump from ecm, hooked to 12 volts and drove 40 miles pulling a load and seemed fine. I didn’t want to take a chance on starving VP44 any more.
-
ECM gone. What about VP
@Mopar1973Man Yes pump has a relay. Actually the in-tank pump had a relay. @dripleyI’m not sure about much except when I lost pressure, truck began running badly and as soon as pressure came back truck smoothed out completely.
-
Up yet?
Does that come with sound?