Everything posted by Threadzy
-
boost elbow questions
I put my stock air filter assembly on when I smog it. My Quad is hidden and passes with it on. My injectors burn clean. My first 10 psi is set at 100% fueling. Don’t even need to run it on valet, So even if I had to take it off to pass there shouldn’t be an issue.
-
boost elbow questions
Do you have to take that off when it comes smog time?
-
Headstud install
I changed mine out one at a time. Then I retorqued them after they were all installed. I don’t recall having to lift the cab or anything extra to replace the back studs. It’s not said to do it in the instructions but after a week of driving I did a retorque to 130 ft. Lbs. Also relashed the valves both times.
-
New 2nd Gen owner
Welcome aboard!
-
Happy New Year 2023
Happy New Year!
-
So, I got gauges for Christmas!
I would also get the needle valve. That way you have full control of flow. Also if the line or sending unit starts leaking you can shut it off till it’s repaired. I’d drill the probe on the back three cylinder port. Don’t drill in the middle. The port divider is there.
-
Merry Christmas
Merry Christmas!
-
Intermittent rough idle/running in general
Very likely. Bad grounds on these trucks will make them do all sorts of weird stuff.
-
Intermittent rough idle/running in general
I would confirm the W-T mod is done and done correctly. Clean all grounds and get the other battery in. What brand sticks are you running? My truck idles smooth with no haze. Have you checked for any codes with a scanner?
-
Unpaid members
-
Diesel Price
Costco last night was $5.39. Last fill up was $5.79.
-
Inconvenience of EVs
IMG_4201.MOV Ran across this today.
-
Happy Thanksgiving!
Happy Thanksgiving!
-
New places to camp
My brother in law and I are talking about heading up to Courtright in the spring. Its up above Shaver lake I believe. It’s dry camping and first come first serve. Supposedly able to park down close by the lake.
-
Hello everyone...
Posts must be down because this site is so good everyone’s truck is running great! I know mine is!
-
Hello everyone...
Had a cord of mountain oak delivered Saturday. Cut and split already. I don’t think I’m going to ever get a chance to use my new Echo 590 chain saw. It’s still early in the season. I’ll find something to cut. Probably do a snow run sometime after thanksgiving. Getting our first rain of the season today and tomorrow. Started our first fire and drinking a glass of wine.
-
Durafoam seat cushion
Yup! Motor makes noise but nothing happens.
-
Durafoam seat cushion
My up and down on the seat doesn’t work anymore. Going to order a replacement from @Genos Garage.
-
What off a 24v will work on a 6.7 block?
How did it come out?
-
Durafoam seat cushion
Just replaced my drivers seat foam with @Genos Garage durafoam. Wow what a difference! So much more comfortable. I sit a little higher now. More leg room. Was easy to replace. If yours is worn I highly recommend it!
-
Genos seat cushion
Will do!
-
I believe my fuel return line is leaking.
Yes that would cause a hard start. For now I would just try tightening the bolt.
-
Genos seat cushion
Just replaced my drivers seat foam with @Genos Garage durafoam. Wow what a difference! So much more comfortable. I sit a little higher now. More leg room. If yours is worn I highly recommend it!
-
How hot are you?
Stay safe! This week we’ve been between 104 -113. Today is supposed to hit 107. Tomorrow will drop down to 88. I’ll take it! Mid 90’s to high 80’s is in the forecast next week! Even showing our low temps in the upper 50’s.
-
Towing, Turbos, and Quads
You should be very happy with that setup. My hybrid spools quick and tows great no regrets. Your SXE should outperform mine. A good tune will make it a beast.