guesswho512

is/was your airdog still in warranty

i have had places sell me hardware for a different rear-end and i have also been sold hardware for the opposite side i was working on. i like to take the pieces i need with me. i try to take everything out of the box and look at them. (when i bought my upper and lower balljoints, one of the lowers was used and not for cummins front end. another time i got the stuff for an oil change. drained all the oil out of the truck. took the old filter off. opened the new filter and it looked like they had played "kicked the filter" with it. i had to walk to the part store, cause i wasn't going to use that filter) i like to use the other side for reference when working on drums

removing the air from the fuel gives a true spray for the injectors.

as air cools at night, water condenses and forms dew. vehicles with open case vents(like motors without EGR and diffs) can have water condense inside them. a very small amount that is normally burnt off when you reach operating temps. my truck rarely pulls a trailer these days, but i still time find time to drag one out of the weeds to get the temps up.

anybody know of any good freeware for making ram drives?

would a de-humidifier help when fighting back mold?

thats where my stuff has gone!

i have made dozens of political figures look stupid in cropped shots (she was a puppet, before my pic showed the masses). pic is a fraud as the halloween in question Mrs. was a cat and Mr. didn't dress up. http://www.dailymail.co.uk/news/article-1224451/Michelle-Obama-channels-Catwoman-White-House-Halloween-extravaganza.html something is easy to sell when people want it sooo bad.

i finally understand why i come here day and night now

straight from the FSM so still within specs

maybe if their products will work with other ISBs other than dodge?

hmm...i was planning on taking a peak tomorrow...may try this for my self

before i order my airdog150, i called Pureflow and asked them a similar question. i was told that the pump was compatible with bio, although the 1/2" lines they were using could start cracking if you ran HEATED veggie oil. i also asked if i was required to kill the truck while fueling. no you are not required to stop the pump during fueling.

home depot and lowes have the plumbing scattered... in addition to the plumbing section, check the sprinkler section, refrigerator section(ice machine plumbing), and maybe even air tools... you won't find any size smaller than 1/8, so don't waste your time. the best place i have been was midwest hose & specialty.....they fixed(among other things) my bernzo "whip" torch as a walk-in in about 15 minutes. ace hardware, HD, lowes, oreilly's would not touch it. very friendly staff.

studs are need for increased cylinder pressure(ie. alot of fuel and boost). i have no xp at this, but from what i have read, the head gasket and valve springs are good for 40#. but extra insurance is always nice

i can relate...we can make our own "late night chat". my shifts at 11.30pm - 5am(plus all the running around in the daytime) send me a pm and i will be there

here they are...if memory serves...thats a 70" from a semi. 5" in and out. close to the trans but still has room

what do you mean by "shutters" i am looking at a adrenaline for christmas...but don't want another problem

isx....show them your exhaust and tell them what you paid

i didn't know we ever rode together

notice how you can see the injector spray on 2-5, but on 1 and 6, not so much...i have always been told that 1 and 6 are the hottest cylinders, so why are they the dirtiest?

i thought all the gauges were controlled by the ECM via the CCD bus. hmmm aluminum! i assume that is were the leak was. what a crook you should post his name so others don't fall for his under handed tricks(just like the crooked businesses). the sad part is someone might have been able to lock-n-stitch the block to repair it properly.(see these examples)

all good things come with time....or was all good things come to an end? either way my prime contractor isn't paying anyone. most of the work was completed ~3-4 months ago. they pay just enough to keep the utilities on....well not even that, cause the wife and i have to donate plasma just to make ends meet. as soon as i sue them i won't be able to work in tulsa or okc......either way, the ram is paid off, so when i do hit that big pay day, my ram gets lots of new toys!

ouch! in my ram i can shift 3 times before im on the other side of the intersection...was scared you were going to stall it?

Happy Birthday! november birthdays are the best