2nd Generation Dodge 24 Valve Powertrain

Wednesday i drove my truck around all day with no problems. I pulled up to Dollar General about 2 miles from my house, got my stuff and came back out to go home and the truck wouldn't start. It just turned over. Tried multiple times but no start, just keeps turning over. So i called a buddy to come tow me home. I'd say about 10 minutes later as i was waiting on him, i tried to start it again and it fired right up with no problem. So i drove it home and shut it off, started it again with no problems sitting in my drive way. Friday morning it started up with no problems, drove it about 10 miles and came back home. Truck sat for about an hour, I go out to start it up an…

Ok, for those of you who dont know me and my truck observe. I will start by saying my truck is cursed, some here would agree some will tell you he's not a good enough mechanic. My fuel pump is a Airdog 100 when new it ran about 15lbs of pressure at idle, wot it was 14.50, one year later it drops to 13lbs at idle and 12.50 wot. Ok I have other problems other than that but we wont go there yet. So I just accepted that was normal, so while trying to fix other issues one step at a time ( replacing everythink one peace at a time till I fix it or it will be stock again ) I started with fuel pressure hose from pump to isolater. No leaks no cracks in line no slite fuel on fitting…

I am ordering a vp44 and was going to replace the stock replacement fuel pump while i am ordering which airdog do yall recommend. i am going to stay stock might install a smarty later on down the road. any suggestion.

Okay guys my next purchase are going to be batteries.... Exciting I know but they are getting weak enough that if I don't have the truck plugged in, the grids pull them down too much and the starter won't spin fast enough to start the truck... Had this happen to me the other day which sucked b/c the folks and I were going to go into town to shop/eat. My question is, what do you guys recommend for batteries? I've had decent luck with Die Hards but I'm not 100% sold on them in my '75 Chevy. I'm thinking about Autozone Duralast Gold top b/c they are well priced and easy to get. Plus they've got a good warranty and I've had great luck with them in my '71 VW and one of the Cum…

Can someone give me suggestions on which billet tappet cover to buy? I've changed the seal once already.... I don't want to do it again so I'm going billet... I've heard Keating Machine tappet covers are good? What's everyone's opinion on brands and longevity?

Ok after all the help on here i decided to go with a reman nv500 from haisly machine im going with a 01 so it will have the 1 3/8 input. Now will the larger flywheel and clutch fit with no issues as long as i get the starter spacer and what clutch do yall recomend for a stock to 500hp truck to tow with

Fan clutch has gone bad and need to get a new one. Which fan clutch does a good job at a fair price? I don't want an electric fan. I drive the truck only 4k to 6k miles a year and the pay back in fuel savings, if any, would be seen until after I'm dead. I've check the price on Hayden ( $102 ), NAPPA ( $122 ), and 4-Seasons ( $143 they must be real proud of theirs). So what have you put in and how do you like it?

My truck is mild when I bought it it had a Banks stinger package intake, exhaust, ottomind box. And has in tank lift pump. So I'm going with a Fass Td-08-095g and a sump feed is this the part number I need or should I get something else ?thanks.

When looking up the tightening specification for installing the bolts that hold the flywheel or drive plate to the crankshaft I found two different values. In the engine section under "Crankshaft Oil Seal - Rear" the tightening torque given is 101 ft. lbs. In the "Automatic Transmission 47RE- Torque Specifications" chart the number given is 55 ft. lbs. One of these is a mistake; which one is right?

My 99 QCLB has 315k on it and is on the 3rd lift pump. The previous owner had the fuel pump replaced by the dealer the first time then used a big rig shop's replacement similar to the carter. So far it has been working great. The big rig shop also installed a fuel pressure dummy light which comes on only when with the wait to start is there. One of the banjo fittings on the VP44 is where the dummy light has been installed. Once the truck is running it never has come on. I mostly use the truck for hauling a little 7x12 utility trailer, camping, and pretty much any other excuse I can use to drive it. Reading through the different articles I see the first upgrade I sho…

I might have made a mistake in my build purchase. First and foremost, I've got to deal with CA smog checks. It was mentioned to me that techs were now looking for Holset being listed on turbos. I know this is dependent on individual techs and most would not even bother. I'm pretty sure the place I go, this wouldn't be an issue. But you never can tell when this would change. I really gave a hard look at this "Super 9" a local company builds . I'm second guessing my decision not to go with this. I don't really care about HP numbers. I care about towing a 10k lb travel trailer through mountain passes. I have a mildly built auto, 3.55's running 265/70/17 Michelin's. I'll like…

I have used a 150-amp fuse on the last three W-T mods I have done and want to try a circuit breaker on the next one. So my question is which 150 amp circuit breaker did you use that is trouble free and where did you get it.

So I got the billet convertor, BHAF, muffler delete and D-box all installed. Truck is working awesome but I want to change out the injectors as I believe they are still the originals and have 440,000kms on them. I keep seeing RV275 listed, are those a 275 horse injectors or 40 over stock? I was thinking of getting injectors from Pensacola off Ebay but read some bad feedback on them on this site and others. So I think I will go with some DAP injectors but I'm not sure which ones I should get. I will eventually get a real programmer that taps the pump, but will probably not change out the stock HY turbo. Are the lower HP injectors worth it or should I just go bigger t…

Hey guys, Now I know iv'e been over this particular topic before but iv'e come to view some new info regarding lift pumps well new to me anyway lol. So I was vewing some threads on here and came across the Assassin lift pump, and read that these pumps actually increase pressure with RPM's which of course I really liked that, and the fact that there a mechanical pump. Also during my discovery i read that in order to install this pump you have to replace the draw straw. Is this something that absolutly has to be done with this style of pump? My original choice was a Raptor 100 but also viewing some threads on here I discovered that the new owners of AirDog F..... them up so…

Ok so i was in an accident about 4 months ago and the truck is being totaled by other partys insurance. Ive only had it a year and i havent made a big dent in the loan so after its paid off i wont have much left to play with so i am gona be looking for a new truck. I liked having the 6spd. I dont want to go to low on year. Wana avoid the 53 block and KDP problem. I had great mpg on my truck so wana stick with same options. I am willing to hear some advise and opinions. My question is is a 5 spd better than the 6spd. I know that the 6 spd have the Dana 80. Anyways what shall i get?? Im currently thinking about this one. http://www.canyonstateauto.com/inventory/view/56186…

After testing and conferring the consensus is my truck needs a new torque convertor. The truck is used 95% of the time towing a 8,000+ pound 5th wheel and the transmission is basically stock. Which brand is good and which type, stock or billet? Should it be a single or triple disk? High or low stall speed? Any thing else you can think of.

I need to order a pump this week, which one is best?

While my Quad was down and I was running around on the stock tuning, I noticed I couldn't build more than 20psi of boost or exceed 900* on the EGT gauge. I figured the stock turbo was waste gated to 20psi and that's why it didn't make more. I know the S300 will make 30+, does the truck defuel when it senses the boost level to keep it from rising?

If its not one thing its another. With the help of you guys finally got the obvious issues resolved with my white beast. Now however about a week ago the truck started producing a new quite loud sound when I let up on the accelerator. Hard to reproduce in letters but sort of a "whirrr" or "rurrr" noise that starts the moment I take my foot off of the fuel pedal and continues until the rpms drop. The harder I am accelerating when I release the pedal, the louder it is. I do not hear it when I am accelerating but at that time the exhaust noise may be covering up the sound. I don't notice any driving issues (truck seems to be running normally) and no check engine light,…

Having a new issue.. idling truck runs great very slight haze but nothing new.. take off down the road under low throttle it does great.. than between 20-50%ish throttle I begin to have white smoke pouring out.. under full throttle it’ll clear up to black.. I’m throwing no codes, turbo is rather new and have inspected behind filter and down pipe with no signs of oil.. injectors freshly pop tested, compression test recently has been done. Could injection pump be failing with no codes being thrown? Any other ideas?