Royal Squire

Didn’t mean to criticize, it just seems I’m so easily confused these days. You’re saying that a 24v is easily started by rolling down a hill and releasing the clutch? I’ve pushed or pull started a lot of vehicles, but never one of these. Thanks for sharing your wealth of knowledge.

In my experience, “jump starting” usually refers to the process of starting by using jumper/booster cables between a fully charged battery and a discharged battery. Don’t believe that is what you’re referring to here, so was confused for a minute. Maybe another “regional” term.

Thank you

Might consider replacing tappet cover gasket while you are so close.

Isn’t that creeper called a “bone”

@Mopar1973Man Mike to do that quick reset do you turn the key on before disconnecting the batteries?

@BobalosHow long does the 80 step take?

Did you have all accessories turned off and engine warmed up before testing?

@woodtruckerIf you’re adding a full 3 gallons I believe it will be a quart over full.

You could loan him your truck till the new one comes in. Maybe he’d even give you a ride in the new truck

@Me78569I know this is off topic, but how come you’re without a truck?

If you call Vulcan they will help you figure out what you need.

When I did mine I cut off the female quick connect and just shoved the hose over the male and clamped it. Wasn’t easy but I didn’t want to drop tank again.

Had a neighbor that lost a joint in rear drive line on his bronco and drove for quite a while with just front shaft. Never went very far or very fast though

You could just remove it

Can’t move engine back?

@BBHD You could call that a small issue. Is that original clutch?

Congratulations! Is that a winter front on there.

Can the carter “bypass circuit board” be adapted to aftermarket pumps?

Possibly the inside snap rings are missing

This reminds me of an old pickup I used to have. I had changed the box, the hood and both doors. It had 7 different colors on it.

At least you have nice looking wheels

You guys almost have matching trucks ?

While it may be unnecessary, I have both, I also used commercial air brake line from the snubber to the gauge after mopar1973mans recommendation.