2nd Generation Dodge Non-Powertrain

Trying to find a diagrahm from the power panel to the a/c comp etc can anyone help. i could not get the ones on this page to download to my mac. thanks

Hey guys, I am looking for a roof mount rack for my rifle. Dose anyone have one that they would recommend?

I'm running 265/75-16 tires. BFG KO's. I'm at 50,000 miles on these and they're almost bald. Any other semi aggressive tire recommendations out there? I run one set year round. 90% street use and 10% hunting on gravel roads, snow, etc.. Prefer tires with the snowflake so they're rated as traction devices.

I need some help and advice, please. I have a 01 2500 Cummins, and need to replace the front brakes and rotors. There is a fairly large torx head bolt holding the brake calipers onto the hub assembly. NO ONE has the External socket that fits this bolt. Where the h*** do I get this socket? I have spent two days getting nowhere but frustrated looking for this. An E24 is just a little bit too small and that is the largest that NAPA sells. Also, what size is the internal Torx that removes the caliper sliders from the main caliper assy? thanks for any and all replies! whodat88

Are there any radio/GPS/backup camera combo's like in the new trucks that will fit into the radio cutout in our dashboards?

Hi all, Just picked up a rust free 2000 from Florida. It's a 2500 Laramie SLT. Any good links on power seats? I got the forward-back working but could use the rest of the switches. I have power to the motors but appear to be jammed. This is my 1st power seat vehicle, so I'm ready to learn! Thanks, Dave

There was some talk on here about window deflectors a while ago. My B day is coming up and I thought I would put it on my wish list. Is there a brand or style that is better than others? What are your recommendations?

my rear brakes are toast, in fact the one is still smoking after being parked for 20 minutes. Anyway I found a thread on here about 3rd gen brakes for the front of the 24v trucks, and I was wondering if the rear brakes on a 3rd gen will fit as well?

I am building my '99 2500 Shortbed 4x4 6 speed diesel into an Overland style rig. Not a crawler, but not a mellow desert truck either. I am looking at long arm kits, shackle flips, maybe going to 37s (on 35s now), need to regear and add lockers too. As far as suspension I am looking at DOR stuff...trying to get minimal lift with maximum travel and I think DOR has that covered between the long arms and the shackle flip. Eventually I might do the coilovers but for now I will likely jut respring the front and use my fairly new Bilsteins. I think I will do ARBs for the lockers...pretty darn pricey but it just seems to be the best strongest selectable lockers. I plan t…

I have replaced my flasher relay and my multifunction switch. I've been fighting this issue for awhile and I'm about to just burn it! It's a 2000 2500.thanks in advance

Upper A-Arm bar that the a-arm rotates on and goes thru the bushings? Unable to find on Rockauto or NAPA

Is there another bearing in the actual steering column itself? I just replaced the intermediate shaft that hooks up to the gear box and now the whole assembly wiggles all the way up to the steering wheel...I already did the the bushing that's in the engine bay. I'm trying get the steering tight on this thing and the hole just keeps going deeper. My old intermediate shaft only had about 1/16 of play at the bottom u-joint so now the culprit points to the column itself.

I have been having an issue that's come down to being a major pain in my ***. My truck began to have a slight miss in the pedal, rough idle and would die at times. So I ran some codes and Saw 0216. My mechanic said a miss in the pedal is probably the vp44 taking a dump. About 2 weeks later the truck died! All signs pointed to vp44 so we changed it out. Mind we didn't diagnose, just assumed that it died and wouldn't restart that was it. After changing vp44, 3 days later it acted up again. We check fuel pressures, and pressure tested the pump and checked for air. we found a voltage issue, a battery was shot, replaced it. Decided maybe it was the vp44, claimed warranty and …

Having to change front brake pads, with 270000 mi. Ive changed them more time than I can remember, I would like to hear some opinions on different pads, there is quite a price range on them at places like autozone, orielys and napa, from about 30 dollars to 90.00 dollars, I tow a lot and cant quite afford what it really needs, ( jake brake) I just tore into it today because of a leaky caliper to find out it has a broken piston so this on my list to do.

Decided to build a replacement center console for my 2000. It started when I could not find a suitable place to install my switch panel for the airbag inflation switch's and gauge. So I removed the center console and built a mock up out of cardboard and went from there. The cardboard mockup was 4 inches longer than the wooden one. I decided to attach the CB to the front of it. I ended up with a console 14" wide x 17" long x 15" on the back side(passenger side). It is 9" high on the drivers side and makes a nice arm rest. The panel is going to 16 gauge steel. I have to finalize the gauge layout and cut out the rough holes with the plasma cutter. I picked up some fabric tha…

I can't seem to figure this one out. I was having trouble with my brake light switch, got that replaced and working. Now i don't have high beams, cruise control, or day time running lights (Canadian). I have replaced the DRL module and have confirmed that my P/brake switch is working properly but can't think of where to go from here. I have followed the wiring schematics and still can't find anything. Any help would be greatly appreciated.

What size is the bleeder screw on a 2001 Ram 2500 w/Dana 60? 10mm? Standard?

Looking for a wired back up camera that fits the 2001 3500 extended cab. The Hopkins 50002 system looks good and has good reviews, but they don't say it will fit the 2001. It is just a license plate camera. Anyone have any experience with these, or have a better suggestion. I just want to use it to make hooking up the trailer easier.

Ladys and gentelmen boys and girls experts of all sizes I have a 1997 Ram 2500 4x4 Diesel with power windows and fan that cut out a couple of days ago. Everything else electrical seems to work (although the airbag light comes off and on now) Anyway is there anyone that has the schematic for the wiring to this model. or has a good idea as to the solution. Is there a breaker or something that I am missing. All fuses and relays under the hood and on the driver side fuse panel are good. Blower relay is fine (under steering column) Any help would be appreciated. Its getting hot in here with the windows up

My ac quite working. Clutch not engaging. Checked for a code. None found. Checked continuity through hi pressure switch and clutch circuit. OK Checked clutch physically with external 12 volts. Clutch engaged. Any suggestions?? Where can I find a schematic of the ac circuit?