2nd Generation Dodge 24 Valve Powertrain

Hello folks, I browsed search bars and had some questions. I see there are some pre built tunes for different combos. I am going to be installing 362/475 compounds and a set of 150hp injectors, I see the different injector set ups but nothing to plentiful for a compound set up? Any direction or input would be great!

I decided to open source my stand alone VP44 electronics project. I started a github repository. It's far from a bolt on replacement. It's just a prototype but it has been running reliably for a couple of years now. Unfortunately, it's not a project for beginners and requires good soldering experience and there is one surface mount part on the board. The circuits have some high energy parts and requires some testing before operating. The software is not simple and has time critical routines. An in depth understanding of the MCU internal peripherals (timers, PWM) is also required. Any mistakes in assembly or coding can cause permanent damage to th…

https://www.oreillyauto.com/detail/b/precision-fuel-pumps-4602/fuel---emissions-16775/fuel-pumps-tanks-16472/fuel-pump-strainer-16843/fuel-pump-12322/83db8e3f0135/precision-fuel-pump-module-assembly/a30060/4614935 Is there a way to figure how many amps this will draw, i need to make a harness for it. (i would also appreciate that everyone doesn't scold me for buying it as i have already installed it and i need to make some money with this truck before i will shell out the cash to go a better route)

starting to get a click from the starter seems to be getting more frequent replace the starter or buy the new solinoid repair kit?

This is the second time my truck has done this. I helped a buddy pick up his newly acquired dodge dually and I had to winch it up onto his trailer. When I get done winching, the truck is idling at 950 and won't come down blipping the throttle or brake. I drove it 15 miles miles home and it was still doing it when I got home and every stop sign in between. I came in the house for a couple hours and went back out to reset the apps and cranked it before I did, it fired up and idled perfect. This happened last time I pulled a truck onto a trailer but I had to reset the apps to get it to idle back down. I guess this is a safety feature so the batteries don't get low?

I have a 2001 dodge 3500 5.9 diesel and the alternator went out we replaced the alternator and now my transmission will shift up and down sometimes, most of the time it drive normal please help

Des anyone have a smarty tuner that i could borrow to correct my speedo with the new tires i have on it? I can pay for all shipping to and from. Or is there an inexpensive tuner that can calibrate the ecu for tire size?

So I’ve been through the electrical and I’ve done the ground references and have thrown the 0216 code since I bought the truck but I got away with it for a long time by getting an air dog and improving the fuel to the pump (at mopar1973mans suggestion) and it went away for a yr or two but now I’m consistently getting the dead pedal again and throwing the code again I’m pretty sure the best way to fix it is replace the vp44 just really looking for mopar1973man to send me the info to buy one from the forum cuz I trust his opinion thx for ur time and anyone else who wasted their time reading this.. my truck is an 01 24v ho 6 sp stock injectors

Im starting the project today and checking in to see if there is a preference on what gasket maker to go with as Id like to make this a one time deal. Thanks

Hi I have a strange problem that I have noticed since installing my quadzilla. Since installing my quad I have noticed my TC lock up is lazy and doesn't lock up really unless I'm climbing a grade and pushing the pedal a bit harder. Or I'm wide open in OD it will lock up.. Turn the quad off I get 'normal' lock up in 3rd and OD. Anyone else come into this issue before? Best way to over come? Mystery switches are they worth it? I don't tow I just use this truck for fun it gets used a couple of times a week. I have a bullet input, triple disc modified OD with more clutches etc (firepunk comp 2 rebuild kit without the billet int…

Good morning, I am not sure this is proper place to post, but does anyone know where I can get a grid heater harness for my 1999. I took my off this past spring and I cant find it and want to hook up the grid heater for winter. Tim

I didn't know how to add to @smokeythedodge thread he has already made so here we go. Please move where needed if required. I figured I could post some helpful part numbers/info along for those looking to replace a (2002) Dana 80 pinion seal and/or pinion yoke. Sometimes obtaining part numbers can be annoying and just plain difficult. I replaced my seal due it starting to leak more as than it had. Started leaking then stopped for awhile and now just started again so I bit the bullet and dove in for repairs. I have a *flanged yoke* aside from @smokeythedodge non-flanged yoke in his thread. I have attached pictures of parts/part numbers and in…

Just wanted to express appreciation for communities like this. I haven’t posted/interacted much but I’ve been reading and applying what I’ve read. I’m too green to really chime in other than questions, anyway. I picked up a truck a couple months ago with the intention of building it into a tow rig. It’s not a full time commercial rig but I work remote and the wife and I want to be on the road a lot, so getting the truck ready was a priority. Doing WT’s ground wire mod fixed the annoying TC cycling issue and the vp44/injectors sound happier with a lift pump. Reading here has me settled on a Quadzilla and likely 100hp injectors (rather than 50’s and want…

This code came up on my 2001 3500 Cummins 24v when we had very cold weather. Truck would not start. Replaced filters and truck started back up but code is still on. The truck runs but when I’m going down the road I get a dead pedal and no power but the truck is still running. I take my foot off the pedal and accelerate again and truck is fine. It will do this once and a while but it’s getting worse and worse. I believe it’s the vp44?

I looked at my build sticker in the glove box for the rear end gear ratio and I noticed the rear axle states it's an "anti-spin" differential. In dodges terms is this the same as a posi traction or locker? Just curious. Thanks!

Good morning folks...I have a 2001 with automatic tranny. It has (so I'm told) a DTT rebuild but the torque converter is just rebuilt stock converter.Truck runs perfectly fine until I put the plow on the front of the truck. First time it blew the tranny cooler line (again so I was told). We just got some plow-able snow. I did my driveway in am...no problem...drove 30 miles and parked it...4 hours later, drove 15 miles and started to do another driveway. Temps were not an issue when I started. On second swipe of driveway, trans temp shot up to 175...light came on dash...and O/D OFF light came on. I let it cool by running it in neutral. Tried to drive home and had to…

Is it necessary to disconnect the battery s to pull out, check, or replace a relay in the circuit box? Rick

sorry accidentally posted it twice and the delete option is not there

My Tach, oil pressure, and engine temp gauges stop working all of a sudden. My Speedo and Voltmeter still work. I have had this truck for about 4 months now and this is about the 3rd time this has happened. It will sometimes randomly jar or jump while driving or idling. Nothing is happening at any intervals so I am not sure what it is. Last time this happened it lasted a couple days and it all started working again. I had one battery that needed replaced so I have a one new battery( the factory battery so it lasted 10 years). I hooked the code reader and it gave a no bus code. I forgot the number though. Hope somebody can help. Thanks

:think:Okay, so ever since I've had the whole shpiel with the truck last time running funny, it seems it still will throw a couple codes.Going in the mountains this weekend, so I decided I would run a code reader on it see if it is still running good. Well, turns out it threw a P0234 code 2x. Checked the ECM and PCM as well. Dunno if these trucks allow it or not, but the reader said unable to communicate with the ECM.The PCM said there was companion code set.Now, I dunno if anything serious is occuring or not, but I would sure like to figure it out. I definitely would hate the idea of being broke down in the MIDDLE OF NOWHERE!I have suffered from lower fuel mileage rating…