2nd Generation Dodge Non-Powertrain

Most dashes look like they dropped a cinder block on them. Don't know how they do that much damage. I assume there is some abuse going on there lol. My paint on the roof was spotless last year, I looked at it this year and it looks like I did 60mph down a dirt road, rolled it, and skid for a mile. I know I drove under some tree branches but geeez. I will go get a pic, you won't believe it.

Hello everyone,I found a vendor who will sell the Luber-Finer LFF 9594 water separator for our Airdog systems for a decent price.Western Marketing in Amarillo, TX will sell them for $14.40ea. plus shipping 1-800-333-6789Enjoy!Chris

I just got in and it's 1:00 am. Worked 9 hr today then put new set of rotors and pads on, then pulled vp and swaped the last one they sent due to the second one was a little better. That is a sad statement. Emailed Chip at Blue Chip diesel and he came back saying they have less than 2% come backs on there vp's. Does anyone here have any dealings with them?Later Man

Topic: ecm outlet scam !!! (6 messages, Page 1 of 1) Moderators: Gordon, High Desert Intruder danedog Gender: Posts: 13 Joined: Apr 2008 From: Sanford, NC Bike: S83 gotta love chicks in chaps and thongs Posted: Nov 16, 2009 09:59 PM (Msg. 1 of 6) -------------------------------------------------------------------------------- buyer beware...this has nothing to do with bikes but most of us still own cars or trucks and if you ever have a computer or ecm problem check this out... Re: buyer beware emc outlet This guy is back in business but has relocated to Hazel Park, Michigan. He still is using the web site www.ecmoutlet.com. It is a …

Ok fellas... so every road trip I have made lately I get low fuel pressure at high elevation.... here at home in LA I get 15 - 16psi ... i went up to the Rockies in Colorado... the whole time I was running 10- 12 psi...drove east towards iowa.... pressure started getting better...continued south gets better. When I get back to so. California I'm back up to 15psi... please rule out fuel filters because I had new FASS filters on it... what you all think??

Im gonna add a back up light probably one of those round 35w tractor type lights unless I find a similar style 55w Where can I get a relay and what kind should I get?... auto parts store? 3 prong? Oh you can post your back up light pictures and ideas too Here's a 55w fr $32 mucho bucks https://www.summitracing.com/parts/hla-996176491/overview/

Can anyone tell me the length from bolt to bolt of a DT or DOR track bar on a stock to 3” height. I have the DT bracket and am going to make a bar for it but want a ball park measurement before I install the bracket.

Hey everybody..95 ram 12 valve...I know this subject beat to death...have been looking around, search function little confusing..and not allowed to look at diagrams and pictures yet..My Abs/brake light on. Replaced brake light switch,replaced rear abs sensor..check wire from switch to wire harness in back, Cleaned all ground wire in engine bay. Question my fuse holder in engine compartment has place for abs fuse,but only one spade other side missing spade? Was it broke off? or do i not need fuse? When i do start it the brake light seems to try and go off..but no change in abs light..Does my emergency brake have a switch? Have not looked under steering wheel yet but going …

No blinkers or hazards. 01, 2500, 3/4, 4x4, auto, 360, gasser, black, larime, LB, XC Driving along turned on the right blinker it blinked a Doz times or so then it stopped. I tried the hazards and nothing. Fuse, good, confirmed with a meter. Then, I blamed the relay. Replaced the relay and still nothing. Running/parking lights work so do the headlights hi & low beams. So? Where do I put the blinker fluid? ha ha ha....Not It's going to snow in the next couple of days and my plow truck really kind of needs them to be working when I'm plowing in town.:ahh::ahh::ahh::ahh: :confused2:

As the title says i need the "Proper Term" for a piece on a 1998 Dodge 3500. And i'm in kind of a rush persay as I leave in 2 days for a 4 day weekend at the lake. And the boss wants the truck fixed i need outta my Drive way to get my camper out. Anyway's Today our work truck had a problem just to fill y'all in on how "Fun"it was. Sooo my coworkers used the company truck 3 time's today with no issue persay I was asked to go pick up a Tractor. As they returned in the truck i jumped in road back to the field and hooked up the trailer. Grabed the money for the tractor and headed out. I got down the gravel road hit the brake's and the rear tires grabed and drug alittle (Norma…

Looking at geno's and LMC replacement dash's and dash covers (cheaper!) I'm contemplating which route to go. Has anyone tried the dash cover and is it worth doing or should I bite the bullet and replace the dash? I am not talking about the carpet dash cover.

This might be a dumb question, but when I turn the key on the "Wait To Start" light comes on. Just what is the system doing? What am I waiting on to happen?Since this is my first diesel every once in a while I jump in the truck, put the key in and start it like a gas motor. Am I hurting anything because I am old and forgetful?

Man its been a weird month. Fuel gauge drops to empty comes back for a few days and quits for good. Find out the float wore out enough to slide all the way up the arm and let the arm sink to the bottom. Then had a ticking front on the passenger side come to find out passenger side wheel joint failed and the proceeded to break a clip and push the cap out will pull bushes out. About a month ago my cruise COAST button failed. I found a used switch on Maccari for $15 bucks, and installed it. Then last night figure I would play a bit on my performance tune and found out my wire tap isn't working (boost capped to 33 to 35 PSI). Most likely the tap screw loosen up a bit broke co…

As the title says, I received an unexpected package in the mail yesterday. A brand new set of headlights, complete plug and play with turn signal and new halogen bulbs installed. The wife though I went on a parts binge again so I was getting questions lol. I come to find out that a good friend of mine that had stopped over last weekend had noticed my terribly clouded and full of moisture headlights on my truck. He took it upon himself to order up a full set and have them shipped to me. They are basically stock replacements but I do greatly appreciate his generosity! Looking forward to getting them installed!

I think I’ll paint my valve cover while it’s off for the head studs install. I don’t really care about the looks too much, but if it’s easy enough I was thinking of using the same color of the truck which is patriot blue pearl. I can’t find that exact color in high temp. Will regular Dupli Color Exact Match spray paint work if I use a high temp primer and high temp clear coat? I’ll probably sand blast it to clean up the flaky oem paint.

Alright, so I got a laundry list of items I have for the truck and one of them is to service the rear brakes. I have not done drums in years. Last night, it took me like 2 hours to get one side back together. Let alone, I think I did it wrong. :banghead:If any of you guys have pics of both sides, I would appreciate it. I think I have everything on right, except the shoes. I believe it matters what shoe goes on what side, right?I became a cussing man again last night, which I did not like. Bought new spring hardware, etc. and man they are STIFF! I even bought a brake tool and its not even worth my time, stupid thing!Gaaaah! :ahhh:Also, I'm draining my brake lines and putti…

Could someone look up the fuse location for me. I need to know where the fuse is for the trailer running lights. I've still got taillights on the truck and all work fine. No running lights on the trailer. I've got turn and brakes on the trailer. I'm in the field and don't have my books with me.

I caught a sweet deal on a new driver side seat cushion a couple weeks ago. The seat shop was having a sale, $25 off and free shipping. I tried to get one but code didn't work for me so I canceled the transaction and left a comment on their FB page. Somebody replies to apologize and explain the sale didn't apply to 05 and older ram cushions but to give them a call. I call the guy and he explained the situation further and ended up letting me have the cushion for the sale terms anyhow. While replacing the cushion I noticed that while my cover wasn't visibly torn, one of the rods had pushed through on the right side into the middle seat. I reset the rod and springs an…

Blower will work fine then stop ,checked fuses ,new motor

Well i sold my 1st gen and finally have gotten motivated on finishing fixing up my 2nd gen. But i have a few last minute add ons i want to put on before shes on the road.Current truck info. 1996 ram 12v 2500 2x4 5spd. Motors bone stock except for the kdp tab. Everything else is stock 166kI already ordered an s&b intake (slightly used but not a bad deal off of ebay,I have done searching of all sorts and have chosen my exhaust. Going with 5 inch flo-proaluminized no muffler ( we will see how long that lasts)The one thing i curious of was, i want to get a three gauge pillar pod. I will get the boost and pyro but whats a good gauge to get for the third? I had a trans temp…