Everything posted by Mopar1973Man
-
Dropping the 47re (a618)
You'll know when you get up in place either it will sit into place really easy or refuse to go... But by the pics you given I would say the TQ Conv is in place... Now W&F has to get you setup on the VB part...
-
Manual trans swap.
But be aware the part for the NV5600 could be in short supply... From... http://quad4x4.com/NV5600%20parts.htm Since NV4500 trans were use in several different makes of vehicle Chevy's and Fords also there is more supplies for 5 speed trans than 6 speed trans. I'm still finding reports of trucks at the dealer waiting for 6 speed parts... The extra might be nice but the final gear ratio is (6 speed 0.73:1) and (5 speed 0.75:1) so top gear is basically the same...
-
JL Welding...
Hey I might of hit close to you guys problem... Another member was talking about Trans swaps... I just found a tidbit for you JL... This might be you problem the ECM is from a Auto and the anti-stall is DISABLED... The flash might be your trick...
-
Exhaust sender location
Nor have I heard of any tales of a Pyro probe wiping out a turbo...
-
Dropping the 47re (a618)
I guess though then... Geez... Must be the old tyme gasser I remember sitting in really deep... tHose kind of hang out a bit... wow!
-
UH Huh, like this will ever be possible?
What I'm finding is that you can't have your cake and eat it too.. Either you build up your truck a little bit and blow a bit of smoke and get into the 22-23 MPG bracket or you go for full smog control with DPF and EGR valve and drop to a low of 14 MPG...
-
Dropping the 47re (a618)
Yeah that's poking out a bit far... (Ugh!) But if it finally seated back behind the bellhousing then I would safely assume your in far enough... I doubt that you got this far and you'll make it through... Just got to get the TQ Conv. in all the way. As for the VB work you might talk to Wild & Free hes a good one for Auto's Guts...
-
Oil spill...
I don't think that is fair... A oil company makes a mistake (because of their greed) and we got to pay for it...
-
The Tunnel Ram anyone know about it?
Still keep track of it I'm still curious if it help or not...
-
Oil spill...
Here you go gang the oil spill graphically displayed for ya... http://www.msnbc.msn.com/id/37219823/ns/gulf_oil_spill
-
The Tunnel Ram anyone know about it?
I curious if there is a MPG change from it?
-
Ball joint time!
Good to hear it got fixed...
-
Stalling
Is it like this??? http://forum.mopar1973man.com/showthread.php/1811-Can-the-idle-speed-be-adjusted?p=12780&viewfull=1#post12780
-
Whats your pyro temp pre turbo?
Pulling a 7% grade on the highway about 1,100*F at 18 PSI of boost... (65 MPH)
-
Anyone have these mirrors?
Naw... Your are not electric def nor electric adj... Your safe for the moment... Or do they?
-
Can the idle speed be adjusted?
Way you VP44 is acting you might talk to JL Welding... Seems you to got something in common... But that is plain weird everytime you hit Drive (in gear) it falls on its face and dies not unless you jump into gear rapidily... It like the governor of the VP44 isn't doing its job properly is my feeling... Because the unstable idle isn't right nor is the low idle speed... Something is for such not right...
-
New VP-44
Sound like the overflow valve is weaker?
-
transmission and pump
As for the exhaust brake it has no ill effect ot being used on a engine... The valve creates back pressure equal to that amount of boost you normal produce on the intake side. So it reverse effect is slowing down the engine. As for changing out the injection pump your going to need about another ~$1,500 to do it and tear down the front of the engine... * gear case (Incudes pulling the cam) * high pressure fuel lines * new throttle linkage * new lift pump or change the cam for a cam with a lobe for a mechanical fuel pump. And a few other things that you'll have to change to finish up...
-
Pictures of your truck!
Don't sweat it my truck is no spring checken either... My truck has been hit by a tree, driver side is all chipped up, the pasender side, is rather new looking, rims are starting to corrode, etc... I now try to hide this under a thin coat of wax and dust...
-
Another Million mile Dodge to the record books...
CajFlynn here has 815K on his 2001 Dodge... Here is a copy of his signature... 2001 qdlb, stage 2 f1 injector, 3 disc tc, 4 inch exhaust, arp head studs, ats co-pilot, power puck/smarty, j-hook, lots of gauges, lots of mag-hytec, bhaf, vulcan big line kit, 815K miles
-
24 valve cutting out, need help
I agree with dually... Even though I turn off my Edge Comp its still on doing boost fooling and keeping the Map sensor signal with in reason. So to truely return to stock you got to unplug everything including the wire tap...
-
Pictures of your truck!
How about a good pic of it doing some work... Towing, haulin, getting dirty...
-
Another Million mile Dodge to the record books...
Here you go gang... http://www.thedailytimes.com/article/20100520/NEWS/305209993
-
Anyone have these mirrors?
I'd love to have a set of these mirrors...
-
BHAF filters...
Get a piece of old rubber hose split it down theside and put it over the freon line to protect it from rubbing from the BHAF...