
Everything posted by Me78569
-
Cracked exhaust manifold
I need to check mine out, I get a hissy also, but too lazy to look.
-
Because, Roadkill. If you like wrenching for the sake of wrenching, come on in.
- Going to Dynamic!!
I was gonna say $3500 was a SMOKING deal if it had a billet input lol. Still a great deal without it considering the parts alone for the build must be ~$3000 not much left in there for labor to do the job.- Going to Dynamic!!
Does your "Stage 2" have a built input?- Good Batteries
Yea I would like to get a pair of those for my next camper. My group 31 deep cycle does pretty well for the truck bed camper, but it's prob not up to the task for anything bigger.- If you could go back in time when your truck only had 63K miles
that's what I did then. I followed their directions.- If you could go back in time when your truck only had 63K miles
Still have OEM gasket as far as I know. It crushed quite a lot. I was suprised to see that much difference in the Torque on the nut after a week- If you could go back in time when your truck only had 63K miles
135 # I think Just break them loose.- If you could go back in time when your truck only had 63K miles
after ~1 week my torque on the head studs was ~#15 less than after the install process.- If you could go back in time when your truck only had 63K miles
I am sure they stretch some, but the compression of the gasket is what I noticed after a week. as for the articles, heres the gold https://mopar1973man.com/cummins/articles.html/24-valve-2nd-generation_50/- If you could go back in time when your truck only had 63K miles
Retorque them 3 times then drive easy on it for ~3-5 days then retorque again. you will be surpised how much they tighten up. we have a good injector install article here, I would check the artciles section. You will have to forgive me I don't know the rest of your specs? Auto 5/6 speed? etc.- A cool thing happened today
nice the cruise control works!- No vehicle speed on IQuad
way to be!- No vehicle speed on IQuad
Here ya go. Plug in your info- Dead pedal at high boost
thanks, That will tell us whats going on.- Dead pedal at high boost
can you data log this happening? hold your foot to the floor even when it dead pedals. IT would be helpful to go back to V2 so we can see fueling and timing.- Dead pedal at high boost
What do you mean by Dead pedal? Does the truck hit 53 psi then all power is lost? or does power not increase once you hit 53 psi? Also, Your profile says you have the adr3000 tune loaded but the data log you posted shows cnabus fueling so that would be the V2 base tune. What do you have flashed to the box and what vehicle profile do you have on your iquad?- 2001 24 valve 4x4 auto steering gearbox
If your box is that trashed I would suggest you look at a new one. My memory is dull, but I think red head still makes a good one?- Intercooler
lololol you know it's Jacob right? His garbage is the only truck that rivals my garbage- Great Songs
- Quadzilla Adrenaline V2 Testing
The Iquad screen will show between 0-2 psi at idle depending on the truck. If it is showing 14 psi then your truck ecm is literally reporting it is seeing between 10 - 14 psi at idle. Atmospheric is considered in the calculation- slight chugging between 30-40 mph
I would guess your issue is related to the map issue. wihtout a good map readings you are gonn ahave issues- Slight rant about auto forums
The reason why we put so much time and effort into the articles is for this reason.- Quadzilla Adrenaline V2 Testing
My own sensor failed like this as well back when. I would pop the map part number into eBay and see if you can find a new old stock sensor.- Next Cummins Mod
Don't worry it's got a carb complient exhaust - Going to Dynamic!!