2nd Generation Dodge 24 Valve Powertrain

Here ya go folks. https://www.facebook.com/photo.php?fbid=1636229086603819&id=100006502305486&set=a.1475918309301565.1073741830.100006502305486&refid=13

Hello everyone, long time no talk. Life has been busy and health has been bleh... Long story short i was coming back from utah for a friends wedding and he was moving as well. I towed the uhaul trailer 6'x12' densly packed and very very heavy. Had no problems going through the mountains on HWY 80 EB till about 80 mi from lariamie WY. I was heading up a very long grade and towards the top something bad happened. Here are the stats of when it happened speed 70 gear 6 EGT under 1250 (no more than 60 seconds@1250, i saw it and turned the cruise off and throttled down) boost around 20psi rpm appx 1800~ cant remember exactly but was below 2000 oil psi normal ~6…

First time posting but love this site. I have a 99 Dodge Cummins. Roughly 160,000. This issue started roughly 6 months ago. The truck runs great until a warm restart. Then in bucks and surges a bit when I hit the throttle and eventually goes into limp mode. It has never done it on a cold start. I can put money down I can start it in the morning and it will be fine. I’ll drive to town with no issues. If I shut it off go into a store and come out it bucks and surges then goes to limp mode. It results in a p0606 code. So when it first did it I changed the APPs out to a Timbo apps. I have also changed the MAP and IAT. I sent the ECM off to get repaired. Oddly enou…

Left yesterday to go get a new trailer. And I'm not sure if this is a tuner issue or a truck issue. Codes on truck are for ABS only. When the truck is running 70 at 2k rpm with XZT on the 75hp mode it'll surge. I can drive it out with my foot and it'll go away below 1800rpm and above 2300 rpm. When cruise control is set it doesn't do it at all. When set to MPG mode it does it light surge and still have to play with throttle or set cruise to get rid of it. With switch to off its hard to tell when it surges. Now, with the trailer behind it and the switch to 75hp position, it surges when I'm going down a grade and try to keep my foo…

One magazines opinion. Not sure if biggest advertiser got his name in article or if product is actually better? Anyway worth the read IMO. https://www.drivingline.com/articles/budget-diesel-mods-985-02-cummins

Just returned from our first camping trip of the year... first tow with the Quadzilla XZT+ (2000 tune). I don’t know if the XZT has any effect on the engine temperature. I am used to to running (empty) right on the thermostat, a needle width below the center mark (200 degrees). Towing, I previously ran about a needle width above that center mark. I saw the temp climb to 2 needle widths above on grades... but came down coasting / light throttle on the other side. So we arrived at the parking field, shifted to 4 high & were directed to the best spot. They wanted me to circle outside & “drive through” next to another vehicle which I did... but I could …

So, I've been doing bolt-ons to the motor (62mm turbo, 125 hp injectors, S&B intake, BD intake elbow, 5-inch straight pipe exhaust, and V2 tuning). I have yet to touch the transmission besides regular maintenance. Every time I step on it, I get a little nervous that I'm going to break something. The 47RE definitely doesn't like the new upgrades.... it slips quite a bit when WOT. The guy I bought it off of said it was rebuilt 30k miles ago. I dropped the pan last week and the fluid is super clean and the filter doesn't have any crazy amount of metal shavings. Before I go through this newer rebuild I want to beef it up. From research, I was thinking a triple disc torque…

Hey guys, first post! Stoked to be here. Anyways... I bought my truck about 2 months ago and it came with a built trans from Hartnell transmission in Redding. I proceeded to snap the Billet input shaft Which was obviously defective, and this was repaired under warranty that was thankfully transferred to me. They replaced the converter, pump, put in an Aermet shaft that I paid for, and cleaned out the rest of the trans. While the trans was out I had them put in a billet accumulator and 2nd gear servo, 4.2 ratio lever and billet anchor and strut (TCS combo kit). Before this work, the trans shifted great. Now that it’s back in, the 1-2 shift is super fast, near instant and v…

My truck has just about 200k on it, I have owned it since 111k. I plan to tow a skid steer on a 14ft dump trailer estimated at 11k lb. combined. I live in Hawaii, we have some steep hills here and there. Recently I towed the trailer with a load of wood chips, and the truck revs way up before much forward movement trying to go uphill. I had considered trying to do some upgrades to it myself to see if I can rectify some of the issues on the cheap..some thoughts were: new solenoid kit; servo/accumulator piston; shift kit (i know, not recommended); trying to adjust pressure up on VB; even trying to change the TC. After thinking and reading on these for months I am leaning to…

Hey guys looking for some opinions, so I’m looking to upgrade my 47re in the near future and have done a fair bit of research and was going to buy a full rebuild kit from rev max but due to lack of time I’m considering buying pre built with a warranty. So I got a quote from my local mechanic (who I personally know) and who has a trans builder in southern Ontario Canada who quoted me at 4700$ Canadian for a heavy hauler rated for 450hp and a 3 year 150,000km warranty, I will never exceed 350hp with my build so I am happy with that rating i’m just trying to see if this seems like a relatively fair price? I would order one from the states but shipping and exchange kinda kill…

So, I was just thinking, don't even really know what brought this up, but if IIRC, a jake brake (ie engine brake) decreases the compression in the motor, causing the cylinders to not be able to utilize the full stroke of the bore, thus regulating the output of the motor, correct?Wouldn't there be a way to do something like this, on a 24valve, using the same programming that allows the 3 cylinder high idle? just wondering, not sure if it actually shuts off the 3 cylinders, or causes the exhaust valves to open similar to an engine brake.

Mods that I have that benefit my 2nd gen... Gauges Fuel pressure with led light Egt Trans Fuel system half inch, air dog set at 19 psi Deep dish trans pan For the future... Latest mod to wiring (Not sure of name) Trans rebuilt (this summer?) Going to check/fix killer dowel pin Pull out dent mom in law gave me. Towing mirrors What are your bulletproof mods?

does any one have the Bully Dog WatchDog . how do you like it is it worth the money.

I have a Bullydog propane kit I'm going to install on my 01 Dodge. The It is an older kit and the tank is out of date. Can I just use a tank from a barbecue or maybe a forklift tank or is there something else I would need? I'll take any good advice that you want to share, Thanks, Donald

I've been looking at some ranchhand front bumpers. I've discovered that they supposedly don't for the sport model. Does anyone know what the difference is and why it won't fit? Is it an easy modification to get it to fit?

I was running down the road last Wednesday and i Look down and the abs and brake lights were on. So i pulled codes today. 250 251 230 500 501 1689 1693 1765 I could see 1 code but all of these? Any ideas guys? thanks in advance.

ok.Going to highlight my ignorance in suspension/differentials here.Heard a squeak like brakes 2 days ago. Ignored it as it kind of sounded like it was comming and going like brakes.Kept coming back and as I was backing in today I jumped out and had wife back it up as it seemed worse hard turn in reverse.Not brakes. Definitely sounded like from the diff/u-joint area. I wondered if I had run out of fluid so pulled the rear diff plug - theres fluid but it really is burnt and darker in color and obviously there's metal on metal contact for that squeaking sound.Heres the tricky part. Its Saturday evening. Im in a state park and moving around 20 miles with 5th wheel tomorrow t…

Newby here, I just bought a 99 dually with an apparent wiring issue! I replaced the entire fuse box and harness this weekend only to barely touch the positive and have smoke start rolling out the fuse box!:banghead: I opened up the fuse box to peek under it and found the burnt wire is from the J/C 1 port. What is it,and how do I fix it? The truck was running before this but had the parking lamp on engine shut off problem. Any help would be greatly appreciated!

In the western US , Who is a good dealer to buy a Fass titanium from ? Id get one from Eric at Vulcan but he doesn't deal with fass I just have to decide 95 or 165gph Im leaning toward the 95 . Im thinking the 165 will be just wasting energy returning a lot of unnecessary fuel volume back into the tank probably just causing more air .

I’m looking at buying a 99 24 valve that has been rolled over to either part out or fix up. It has 285k runs well drives well I’m not sure if it’s a 5 or 6 speed yet. Owner claims it gets 21MPG on hwy. Also says he still drives the truck occasionally. He wants 4500$. What do you guys think? Link below for pics. https://spokane.craigslist.org/pts/d/reduced-1999-dodgex4-quad-cab/6754872442.html