Dieselfuture

Isn't there an oil screen somewhere on the oil cooler that can be cleaned, maybe clogged up from flushing.

Thing is, Gorge hasn't predicted anything, he's part of the club, in the known... meaning these bastards planned this long ago and following it through. There are no heroes in this world but Jesus, that had to die for all of us, because none of are good enough, we're all sinners. Rabbit hole goes very deap. The only way to control opposition is lead it ourselves. If people need a hero we will give them one. American people don't believe anything until they seen it on TV. We know our disinformation campaign is complete, when everything people believe is false. The list goes on...... Nothing new, same old tricks. Soon we won't be able to express our thoughts and feelings, it will be illegal and considered radical, like domestic terrorism, laws have already been passed to detain anyone without probable cause indefinite, no warrant required, just under suspicion is good enough. Enjoy it while you can, or stand up for that's right, we don't have much time left as "free" people of this world. Not much else to say, hope it's all bs and things will get back to "normal" I just can't seem to see it go back at this point, I hope I'm wrong and full of shiiit. I'd be glad if you all make fun of me and all this goes away, so we can go fishing. I don't mind looking stupid when I have to, don't have a big ego.

I used a Mopar one from rockauto, so far it's been good, I don't understand why they went with you steering in first place on solid axle. Squrel is a bonus.

@CUMMINSDIESELPWR well said man. It's a seek game these people been playing since begging of time itself, they just now coming out of woods out in open. They are evil and corrupted to the core. One thing calms me down is, if Bible is true which it proves itself to be every day more and more, then all these pieces of garbage have a special place reserved for them. It's legal to decive now, smith-mundt act been reinstated recently. To me that means everyone that let this happen is corrupt to the core and will do anything for the money, they don't even have to sell their soul, because they don't have one. Welcome to the club. I've always known that this world is not what It seems, just couldn't quite put my finger on it to be sure. Well now with information traveling at a speed of light and the abundance of it, if you have good discernment you can clearly see the end goal agenda, which is total control. Just look at some movies from 80s and 90s, like demolition man, total recall, escape from new York, terminator, they live, etc etc, there are plenty of them. These people behind the wheel of this world, know the agenda and they use tv to preprogramm us with what's to come, that way you're not in such a shock when it happens. Plus they believe it lifts Karma off of them, buy them telling you what they're going to do before they do it. We plan something for next few weeks or a year they plan ahead at least a hundred. The technology has advanced to the point that they are now able to move forward at exponential rate to their final goal, which has always been total control. I got to give them a credit for being so well organized and patient. I could write a few more pages to break some things down but who has time for that.

Don't get me started, I've been trying really hard to be quiet

I haven't resealed mine yet, like @Mopar1973Man said I changed fluid then and just did it again last month. Still damp and not leaking, time will tell. At least I got the reseal kit on hand

You're sitting on the wrong side, is that snow always there, pretty cool.

Could it be vent being plugged and little bit of pressure build up pushed it out, being the vent is on the cad it may accumulate oil in it

As I understand later ECM PCM is preferred, like 01,02 vs 99, but it should work on any vp44 truck as long as it's programmed to a specific one.

If I had to guess, vent is plugged for some time and the seals were pushed against the axle tighter due to internal pressure, then you cleaned the vent and no more positive pressure on the inside so they started to sip a little If the vent was not clogged, then maybe they would last 500k who knows. I bet if there is someone out there with 500k on axle seals and they plug the vent, it'll probably leak then, being they already wore out. Clear vent just prolongs the life of them I suppose.

Could it be old residual before someone supposedly changed hg/rebuilt, maybe didn't get flushed very well. Or could be oil cooler leaking. Compression test maybe, Leak down? Pressure test the cooling system

Same here 35w, plenty of light too, not sure how I went that long without this conversation, thanks @Me78569 for bringing this to our attention.

The only reason I want to have a spare set on hand, one is so they match like you said both 5k, to I don't want to be a paying $100 a bulb at parts store, got both for $62 with shipping.

Is your oil pressure sensor one wire or more, if more I would start there. It can have internal short messing with 5 volts. Otherwise could be in harness like @dripley said. WT mod takes care of a lot of it and there are few more spots check.

He converted his truck to a 4th gen instead

Just got off the phone with retrofit, they don't offer 4500 any longer, going with 5000k. Was going to try a different brand that's more expensive but decided to just stick with morimoto, as they work just fine and still in good shape, just wanted to have a spare set is all.

Probably just going to go with some 5000k as 4000 seem on yellow side. On second thought I'm in love with my current 4500k

Was looking for a spear set of bulbs for d2s in 4500k from retrofit and it seems they only list 4 and 5 k now, when I got my kit it came with 4500k, anyone know what the deal is Also looked at some Phillips on amazon and seems that there are some fakes are out there, think I'd rather go with retrofit morimoto as I had no problems with them so far. Just want a spear set.

Yhea sounds like a scap pile then.

Man I don't know, if it was almost free and you had a bunch of time them at worst case you can scrap it, maybe you get lucky and can salvage some of it. All I know is if you heat metal passed certain temperature it changes structure.

I would say depends on how hot it got, could jeopardize integrity of metallurgy

Same here

I'm jealous, my dream to do that some day. Good move man

Upgrade to v2 tuning, I wouldn't even want to drive my truck without it anymore