Royal Squire

LChecked mine before and after. Went from .035 to .015.

@dripley what is “oyhrt”??

Did you replace bearings?

Probably a good idea to get fuel pressure and EGT gauges.

I neglected to send in my raptor warranty card and they still sent me a new pump.

Yes. I meant ask Rickson about lug nuts and what they recommend.

Ask Rickson

The raptor pump I purchased from Vulcan came with 1/2” lines from tank to stock filter, I also selected a draw straw and 1/2” line from filter to VP44. This setup also included a relay, all necessary wiring and hardware for mounting on frame back near fuel tank. This setup seems to work well for me.

Maybe show a link to the upgrade

Good for your urinary tract too

I wanted a ranch hand bumper also, but couldn’t afford it. Was always looking for a used one, but they were pricey too. Finally ran into a guy who wanted a stock bumper, so traded him my stock bumper and 300 bucks. Bumper isn’t new, but they don’t really wear out. @CTcummins24V where did you get your plow springs?

My isspro gauges fit snugly in whatever brand pillar pod that Vulcan supplies with gauge package. I didn’t use those pieces either

1st photo looks like trailers hooked to a 1/2 ton

A photo here might be appropriate

You could get a second truck and have one red and one green.

Ok. Just curious

@Marcus2000monster I see you have hx35 kit up for sale. I thought at one point you said your turbo seals were leaking. Did you replace your turbo, did I misunderstand or?

Only tried and true method I’m aware of is to capture them!

This isn’t around my place but took a photo yesterday just before heading over Rabbit Ears Pass

You should know. What transmission does have a rear pump?

I was visualizing something much more complicated! I guess that’s what you call a “tuned” exhaust system

Pretty certain a Ford cab and fenders, but could be wrong.

@KATOOMwhat is the “T”post you are referring to?

Wouldn’t it work to put a toggle actuated solenoid between battery and relays. I’m kinda electrically challenged but was curious if this would work.

If I’m not mistaken, if a transmission has a rear pump like a TH 400, it is possible to push start, though I’ve never done it. Maybe @Dynamic has some input on this.